Abstract:Non-medical masks such as disposable non-medical, commercially produced cloth, and homemade masks are not regulated like surgical masks. Their performance, in terms of filtration efficiency and breathability, is variable and unreliable. This research provides a quantitative evaluation of various non-medical masks, assesses their fabrics' potential for the reduction of transmission of bioaerosols such as the SARS-CoV-2 virus, and compares them to surgical masks and N95 filtering facepiece respirators. Using a testing line with a NaCl challenge aerosol, four types of commercial reusable cloth masks, two types of disposable non-medical masks, three types of surgical or N95 masks, and seven types of commonly available materials were tested individually and in combinations. The testing line and procedure were adapted from the ASTM F2299-03: Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres testing method used for testing surgical masks. Filtration efficiencies at 0.15 μm particle diameter at a face velocity of 25 cm/sec for commercial cloth masks, disposable non-medical masks, surgical masks, commercial mask combinations, and homemade combinations ranged from 16–29%, 39–76%, 91–97%, 51–95%, and 45–94%, respectively. The pressure drop results for the different masks and material combinations were all under 3 mm H 2 O/cm 2 except for one material configuration. This study builds on other research that looks at individual materials and masks by testing combinations alongside the individual masks and materials. With proper layering, household materials can achieve the filtration efficiency and low pressure drop requirements of surgical masks. The filtration capabilities of disposable and cloth mask fabrics vary considerably meaning that they are not a reliable or consistent facemask option, regardless of fit.

Airflow resistance and bio-filtering performance of carbon nanotube filters and current facepiece respirators

Air filtration in the free molecular flow regime: a review of high-efficiency particulate air filters based on carbon nanotubes.

Use of Carbon Nanotube Filter in Removing Bioaerosols

High-efficiency retention of ultrafine aerosols by electrospun nanofibers

Filtration performances of non-medical materials as candidates for manufacturing facemasks and respirators

Systematic experimental comparison of particle filtration efficiency test methods for commercial respirators and face masks

Multi-Scale Microstructure Investigation for a PM2.5 Air-Filter Efficiency Study of Non-Woven Polypropylene

Evaluation of nano- and submicron particle penetration through ten nonwoven fabrics using a wind-driven approach

Carbon Nanotubes / Activated Carbon Fiber Based Air Filter Media for Simultaneous Removal of Particulate Matter and Ozone

A high efficiency particulate air filter based on agglomerated carbon nanotube fluidized bed

Effects of Single-Walled Carbon Nanotube Filter on Culturability and Diversity of Environmental Bioaerosols

Advancing Breathability of Respiratory Nanofilter by Optimizing Pore Structure and Alignment in Nanofiber Networks

Carbon Nanotube Mask Filters and Their Hydrophobic Barrier and Hyperthermic Antiviral Effects on SARS-CoV-2

Selective molecular capture mechanism in carbon nanotube networks

The Filtration Efficiency of Single-Layer Textiles for Respiratory protection

Thermoplastic Polyurethane Nanofiber Membrane Based Air Filters for Efficient Removal of Ultrafine Particulate Matter PM0.1

Antimicrobial Nanofiber Based Filters for High Filtration Efficiency Respirators

Biocompatibile nanofiber based membranes for high-efficiency filtration of nano-aerosols with low air resistance

Evaluation of masks and mask material suitability for bioaerosol capture

Multi‐Scale Nanoarchitectured Fibrous Networks for High‐Performance, Self‐Sterilization, and Recyclable Face Masks

Electroactive nanofibrous membrane with antibacterial and deodorizing properties for air filtration