Abstract:Polymer films are widely used as biomaterials, electronic devices, food packaging materials and gas separation membranes. practice, cross-linking is an effective method to enhance their stability and increase the strength of these films. However, conventional cross- linked polymer films cannot degrade under mild conditions. Herein, we fabricated two cross-linkable, yet biodegradable, polymer films of similar to 0.2 mm via solution casting using cinnamate-grafted polycaprolactones, namely: a poly((alpha-(cinnamoyloxymethyl)-1,2,3-triazol) caprolactone) (PCTCL133) homopolymer and a poly(caprolactone-stat-CTCL) (P(CL156-stat-CTCL28)) copolymer. The successful syntheses of the polymers were confirmed via proton nuclear magnetic resonance (H-1 NMR) spectroscopy, size exclusion chromatography (SEC), and Fourier transform infrared (FT-IR) spectroscopy. The PCTCL homopolymer appeared as a transparent film, owing to its side groups that impede its crystallinity; in contrast, the copolymer film appeared translucent, owing to its PCL segments that are easily crystallized. The cinnamate groups facilitated the cross-linking of the polymer films when irradiated by ultraviolet (UV) light; this is indicated by its insoluble character in tetrahydrofuran, which is a good solvent for both polymers. SEC analysis indicated that a fraction of the P(CL156-stat-CTCL28) film remained un-cross-linked after irradiation, owing to its crystalline structure. In contrast, UV irradiation caused the PCTCL homopolymer film to become homogeneously cross-linked, which exhibited a cross-linking density of 49% after 2 has indicated by the H-1 NMR results. Thermogravimetric analysis (TGA) indicated that cross-linking of the PCTCL films caused a minimal change in thermal stability. Both the cross-linked polymer films were able to degrade upon the addition of a modest amount of concentrated hydrochloric acid, as confirmed by SEC and 1 H NMR. However, the degradation rate significantly decreased after cross-linking, thereby indicating its tunable character that can be altered by varying the cross-linking density. In addition, the rate of degradation can be adjusted upon varying the fraction of cross-linked PCTCL groups in the copolymer. In principle, treating the polymer films with sufficient amounts of acid could form degradation products with molecular weights less than 300 g.mol(-1). To further explore the mechanical properties of such materials, we investigated the correlation between the initial concentration used for solution casting and the Young's modulus of the film by employing molecular dynamics simulations. These results indicate that tougher films are prepared when using more concentrated polymer solutions, owing to a higher degree of chain entanglement. In summary, the prepared films with tunable degradability are promising materials for biomedical applications. In principle, this platform could be utilized in hydrogels and coating materials for a broad scope of applications.

Biodegradability, Cellular Compatibility and Cell Infiltration of Poly(3-Hydroxybutyrate-co-4-hydroxybutyrate) in Comparison with Poly(ε-Caprolactone) and Poly(lactide-Co-glycolide)

Preparation of Open-Porous Stereocomplex PLA/PBAT Scaffolds and Correlation Between Their Morphology, Mechanical Behavior, and Cell Compatibility.

Cytocompatibility Evaluation of a Novel Series of PEG-Functionalized Lactide-Caprolactone Copolymer Biomaterials for Cardiovascular Applications

In Vitro Biocompatibility and Degradation of Terpolyester 3Hb-Co-4hb-co-3hhx, Consisting of 3-Hydroxybutyrate, 4-Hydroxybutyrate and 3-Hydroxyhexanoate.

Synthesis, characterization and biocompatibility of novel biodegradable poly[((R)-3-hydroxybutyrate)-block-(D,L-lactide)-block-(ɛ-caprolactone)] triblock copolymers

Study on Poly(l-Lactide-co-trimethylene Carbonate): Synthesis and Cell Compatibility of Electrospun Film.

Biocompatibility and Biodegradation Properties of Polycaprolactone/polydioxanone Composite Scaffolds Prepared by Blend or Co-Electrospinning

Mechanical Properties, Crystallization and Biodegradation Behavior of the Polylactide/Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/Poly(but Ylene Adipate-Co-terephthalate) Blown Films

Biocompatibility of a New Biodegradable Poly Butylene Carbonate Electrospun Film

Novel Biodegradable Films and Scaffolds of Chitosan Blended with Poly(3-Hydroxybutyrate).

Haemo- and cytocompatibility of bioresorbable homo- and copolymers prepared from 1,3-trimethylene carbonate, lactides, and ε-caprolactone

In Vivo Study on the Histocompatibility and Degradation Behavior of Biodegradable Poly(Trimethylene Carbonate-Co-D,L-Lactide)

In vitro hydrolytic degradation properties of poly(D, L-lactic acid) / poly(L-lactide-co-ε-caprolactone) blend films

On the Development of Polylactic Acid/Polycaprolactone Blended Films with High Retention Capacity

Cross-Linkable Yet Biodegradable Polymer Films

[Experimental Study on Biocompatibility of Vascular Tissue Engineering Scaffold of Epsilon-Caprolactone and L-lactide].

Physical, mechanical and biological properties of poly(ɛ-caprolactone)–poly(ethylene glycol)–poly(ɛ-caprolactone) (CEC)/chitosan composite film

In Vivo Biocompatibilty and Degradation Behavior of Elastic Poly(l-Lactide-co-ε-caprolactone) Scaffolds

Novel biodegradable aliphatic poly(butylene succinate-co-cyclic carbonate)s bearing functionalizable carbonate building blocks: II. Enzymatic biodegradation and in vitro biocompatibility assay.

Degradation of P(3HB-co-4HB) Films in Simulated Body Fluids

In vitro and in vivo degradation of poly(L: -lactide-co-glycolide) films and scaffolds