Abstract:A novel bio-based benzoxazine resin (phenolphthalein-furfuramine-benzoxazine , PTL-F-BOZ) , used bio-based furfurylamine , phenolphthalein , and paraformaldehyde as raw materials , was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR) , nuclear magnetic resonance (H-1 NMR and C-13 NMR) . The curing , thermal and flame retardant properties were analyzed by differential scanning calorimetric (DSC) , thermogravimetric analyzer (TG) , limiting oxygen index (LOI) , vertical burning test, microscale combustion calorimetry (MCC) , cone calorimeter(Cone) and scanning electron microscope (SEM) . The DSC curve of PTL-F-BOZ showed a two-stage curing with two maxima at 224 and 251 degrees C respectively, and had lower curing temperature than that of the traditional fossil-based bisphenol benzoxazine bisphenol A-aniline benzoxazine (bisphenol A-aniline-benzoxazine , BPA-A-BOZ) . The presence of the furan ring in the furfurylamine increased the cross-linking density of polymer, retarded the rearrangement reaction from the phenoxy structure to the phenol structure, and resulted in two curing peaks in the DSC curve of PTL-F-BOZ. Under nitrogen and air atmospheres, the temperatures of 5% mass loss (T-5%) for PPTL-F-BOZ resin were 380 and 370 degrees C , respectively and the residual chars at 800 degrees C were 63. 0% and 10. 5% , respectively. Compared with PBPA-A-BOZ resin, PPTL-F-BOZ resin both possessed higher T-5% and residual char of 800 degrees C. From the DTG curve , the maximum mass loss rates of two decomposition stage (Peak 1 and Peak 2 values) of PPTL-FBOZ resin were 0. 67%/min and 3. 28%/min, which were only 7. 38% and 63. 44% of PBPA-A-BOZ (9. 07%/min and 5. 17%/min) under nitrogen atmosphere , and those were also the same under air atmosphere. LOI of PPTL-F-BOZ resin was 36. 2%, which was higher than that of PBPA-A-BOZ resin. Meanwhile, in the UL-94 test, PPTL-F-BOZ resin extinguished quickly and released less smoke during combustion process, and the original morphology was kept well and a stable carbon layer was formed after burning. Its first ignition time(t(1)) and second ignition time(t(2)) were 1. 4 and 8. 5 s , respectively , far smaller than the maximum permissible values of 10 s, and a UL94 V-0 rating was also achieved. Hence, PPTL-F-BOZ resin showed excellent thermal and flame retardant properties.

Synthesis, curing behavior, and thermal properties of fluorene-based benzoxazine-endcapped copoly(ether ketone ketone)s

Synthesis and Properties of a Novel Bio-based Benzoxazine

Synthesis of Aromatic Diamine-Based Benzoxazines and Effect of Their Backbone Structure on Thermal and Flammability Properties of Polymers

Synthesis, thermal polymerization, and properties of benzoxazine resins containing fluorenyl moiety

Film-forming Characteristics and Thermal Stability of Low Viscosity Benzoxazines Derived from Melamine

Synthesis and Characterization of Highly Soluble Poly(aryl Ether Ketone‐benzoxazole) Copolymers with Hexafluoroisopropylidene Moieties by Direct Copolymerization

Synthesis,Characterization and Thermal Properties of Fluorene-Based Benzoxazines

Synthesis and Copolymerization of Benzoxazines with Low-Dielectric Constants and High Thermal Stability

Benzoxazine Containing Fluorinated Aromatic Ether Nitrile Linkage: Preparation, Curing Kinetics and Dielectric Properties.

Synthesis and Thermal Properties of Phenol- and Amine-Capped Main-Chain Benzoxazine Oligomers with Multiple Methyl Substitutions

Synthesis of triphenol‐diamine‐type hyperbranched benzoxazine and improvement of thermal properties and toughness of typical benzoxazines

Thermal, mechanical and dielectric property enhancement of benzoxazine-containing phthalonitrile resin: The effect of functional oligomeric polyphenyl ether

Synthesis, Characterization, and Functionalization of Hyperbranched Poly(ether ether ketone)s with Phenoxypheyl Side Group

Synthesis, ring-opening polymerization, and properties of benzoxazines based on o- and p-hydroxybenzyl alcohols

Crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties: Synthesis, characterization and properties

Synthesis and Characterization of Fluorinated Poly(aryl Ether Ether Ketone)s Terminated with a Phenylethynyl Group

Synthesis and Characterization of Fluorine-containing Poly(ether ether ketone ketone)

Thiophene-Rich Benzoxazines with an Amide Moiety: Integration of Structural and Hydrogen Bonding Influence on the Polymerization Mechanism by Experimental and Computational Studies

High Heat-Resistant and Degradable Polybenzoxazines with a Diacetal Structure

Synthesis and Properties of Phthalonitrile Terminated Polyaryl Ether Nitrile Containing Fluorene Group

A Bio-Based Polybenzoxazine Derived from Diphenolic Acid with Intrinsic Flame Retardancy, High Glass Transition Temperature and Dielectric Properties.