Abstract:The interfacial characterization of aligned carbon nanotube/polyimide nanocomposites. The interaction properties can be significantly improved by using conjugated polymers with aromatic rings for carbon nanotube (CNT)‐reinforced composites. In this study, we investigated the influence of the molecular structure of the polyimide (PI) conjugated polymer on the mechanical properties and interfacial characteristics of CNT/PI composites. To that end, nanocomposites composed of aligned multi‐walled carbon nanotubes (MWNTs) and PI with three different molecular structures were examined. Tensile tests, small‐angle x‐ray scattering (SAXS), and molecular dynamics (MD) simulations were conducted, which revealed significant variations in the tensile properties among the three aligned MWNT/PI nanocomposites. The SAXS analyses indicated that MWNT/BPDA‐PDA had the largest interfacial specific surface area, as corroborated by the MD simulation results, which further demonstrated that the rigidity of the molecular structure influenced the extent of wrapping the PI chains around MWNTs. A highly rigid molecular chain hindered the intrachain folding of the PI chain, facilitating better wrapping of the MWNTs and a larger interfacial area. The MWNTs induced conformational changes in the PI chain owing to π–π stacking. Hermans orientation factor revealed that BPDA‐PDA exhibited the highest degree of orientation with MWNTs, whereas BTDA‐MPD displayed the greatest extent of MWNT‐induced conformational changes. The calculated interaction energy confirmed that MWNT/BTDA‐MPD exhibited the strongest interface strength (−41.50 Kcal/mol/nm2), which was 36.32% and 43.03% higher than that of MWNT/BPDA‐ODA and MWNT/BPDA‐PDA, demonstrating its superior tensile properties. This study provides insights into the interfacial characteristics between conjugated polymers and CNTs, which are essential for designing interfaces and developing high‐performance nanocomposites. Highlights Interfacial interaction between polyimide and aligned carbon nanotubes was investigated. Modulation by polyimide structures on the mechanical property of composite was revealed. The rigidity of the polyimide hinders the folding and facilitates the wrapping. The interfacial interaction induces molecular orientation in polyimide can be observed by molecular dynamic simulation.

An Investigation into the Hydrogen Bond of Poly (p‐phenylene Benzobisoxazole)/carboxylic Carbon Nanotube Composites, Insight from Quantum Mechanics/molecular Mechanics Simulation

Tensile Properties of a Boron/nitrogen-Doped Carbon Nanotube–graphene Hybrid Structure

A 3D POM-MOF composite based on Ni(II) ion and 2,2′-bipyridyl-3, 3′-dicarboxylic acid: Crystal structure and proton conductivity

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites

Poly(2,6-dimethyl-1,4-phenylene Oxide) (PPO) Multi-Bonded Carbon Nanotube (CNT): Preparation and Formation of PPO/CNT Nanocomposites

Enhanced dielectric performance of polydimethylsiloxane‐based ternary composites films via tailored hydrogen bonds between carbon nanotube and barium titanate as modified fillers

High‐performance main‐chain polybenzoxazine composites by incorporating multi‐walled carbon nanotubes with different surfacial structure: Mechanical properties, thermal stability and mechanisms

Preparation and Properties of Cyclic Olefin Copolymers Multiwalled Carbon Nanotube Nanocomposites

Single-walled Carbon Nanotube–polymer Composites: Electrical, Optical and Structural Investigation

Investigation on the interfacial mechanical properties of hybrid graphene-carbon nanotube/polymer nanocomposites

Effects of polyurethane/functionalised carbon nanotube interfacial interactions on tensile and compressive properties – molecular dynamics simulations

Molecular dynamics simulation of polymer wrapping for interfacial characteristics of aligned carbon nanotube/polyimide nanocomposites

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

Poly( p -phenylene benzobisoxazole) Fiber/Epoxy Composites Reinforced with Carbon Nanotubes and Graphene Oxide for Enhanced Interfacial Adhesion and Mechanical Strength

Understanding interactions between poly(styrene‐ co ‐sodium styrene sulfonate) and single‐walled carbon nanotubes

Polyolefin elastomer/cyclic olefin copolymer/multi‐walled carbon nanotubes nanocomposites: Rheological, morphological, electrical and mechanical study

Influence of Carbon Nanotubes with Different Functional Groups on the Morphology and Properties of Ppo/Pa6 Blends

Effect of polyhedral oligomeric silsesquioxane (POSS) nanoparticle on the miscibility and hydrogen bonding behavior of CO2 based poly(cyclohexene carbonate) copolymers

Hydrogen-Bond- and Shear-Field-Induced Self-Assembly for the Efficient Preparation of Polybenzoxazole Nanofibers with Excellent Mechanical Properties and Heat Resistance

Mechanical Properties of Functionalized Carbon Nanotubes

Regulation and prediction of the dielectric constant and interfacial binding energy of surface modified hexagonal boron nitride/polyphenylene oxide@cyanate ester resin