Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Auv Docking Experiments Based on Vision Positioning Using Two Cameras

Auv Terminal Docking Experiments Based on Vision Guidance

Terminal Underwater Docking of an Autonomous Underwater Vehicle Using One Camera and One Light

A Fast Binocular Localisation Method For Auv Docking

An Improved Localization Method for the Transition Between Autonomous Underwater Vehicle Homing and Docking.

Research on the Machine Vision Positioning Method Applied in the Docking System

Light Beacon-Aided AUV Electromagnetic Localization for Landing on a Planar Docking Station

AUV Docking Based on USBL Navigation and Vision Guidance

A Multi-Stage Visual Positioning Method for Autonomous Underwater Docking

Research on the Underwater AUV Docking Station with Two Swing Degrees of Freedom

Research on AUV terminal electromagnetic positioning system based on two coils

Development of an AUV “Xuanwu-1” with Docking Function

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Triangle Codes and Tracer Lights Based Absolute Positioning Method for Terminal Visual Docking of Autonomous Underwater Vehicles

Terminal navigation and control for docking an underactuated autonomous underwater vehicle

Autonomous underwater vehicle docking system for cabled ocean observatory network

Development and Test of a Subsea Docking System Applied to an Autonomous Underwater Helicopter

Underwater Electromagnetic Guidance Based on the Magnetic Dipole Model Applied in AUV Terminal Docking

A Non-Contact Docking System for Charging and Recovering Autonomous Underwater Vehicle

RETRACTED: an Autonomous Underwater Vehicle Docking System Based on Optical Guidance

Autonomous Underwater Vehicle Cruise Positioning and Docking Guidance Scheme