Abstract:The present study investigates the impact of rare earth Ce addition and holding time on inclusions in offshore engineering steel containing arsenic. The analysis was conducted using scanning electron microscopy and energy spectrum (SEM-EDS), automatic statistics of inclusions, and thermodynamic analysis. The results indicate that prior to the addition of rare earth Ce, the typical inclusions in the steel were Al _2 O _3 , MnS and Al _2 O _3 -MnS, with an average size of approximately 2.51 μ m and an irregular or stripe morphology. Upon the addition of rare earth Ce, the inclusions in the steel were transformed into Ce-S(-O), Ce-As(-O) and Ce-S-As(-O), with a smaller average size and a spherical or ellipsoidal morphology. The smallest average size of inclusions in the steel was observed when rare earth Ce was added and held for 5 min; this size was 33% smaller than that prior to the addition of Ce. The thermodynamic calculation revealed that the Ce-S(-O) inclusion is formed in molten steel, while the Ce-As(-O) inclusion is formed during the solidification stage. As element replaced parts of the S and O elements in the Ce-S(-O) inclusion and formed the Ce-S-As(-O) complex inclusion, characterized by a double-layered structure.

Study on Interaction among Cerium-Arsenic-Iron

Study on Interaction Between Cerium and Arsenic

Microstructure and Interaction among Ce-As-Fe at High Temperature

Research on Interaction Between RE Cerium and Arsenic in Steel

Microstructure and Compound Developed from the Ce-As-Fe at 1173K

Microstructure and Compound Developed from Ce-As-Fe System at High Temperature

Study on Interaction Mechanism of Different Atomic Ratio of Neodymium, Arsenic and Iron

High-temperature interaction of Ce-Fe-As ternary system

Study on the interaction of rare earth element neodymium,iron and arsenic at 1173 K

Study on Interaction Between Cerium and Tin in Steel

Effect of Cerium on Characteristic of Inclusions and Grain Boundary Segregation of Arsenic in Iron Melts

Effect of Rare Earth Ce on the Isothermal Oxidation Behavior in Air of Arsenic Bearing Steels

Combined Products of Cerium and Lead in Steel during Molten Infiltration

Study on the Interaction Mechanism in the Pr–Fe–As System

Study on Interaction Between Rare Earth Cerium and Low Melting Point Metal Lead in Steel

Effect of Cerium Addition on Microstructure and Mechanical Properties of As-Cast High Grade Knives Steel

Analysis of the micro-alloying effect of cerium additions to the Al-Li alloy 2090

Microstructure and Compound Developed from La-As-Fe System at 1223K

Reaction Behaviour Between Cerium Ferroalloy and Molten Steel During Rare Earth Treatment in the Ultra-low Carbon Al-killed Steel

Compounds Developed from the La-As-Fe System at High Temperature

Effect of Rare Earth Ce Addition on Inclusions in Offshore Engineering Steel Containing Arsenic