Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

Improved Delayed Detached-Eddy Simulation of Massive Separation Around Triple Cylinders

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

Numerical simulations of the near-field flows past cylinders in tandem arrangements

Computation of Flow Past an In-Line Oscillating Circular Cylinder and a Stationary Cylinder in Tandem Using a CIP-Based Model

Numerical Simulations of Tandem Cylinders with Subcritical Spacing

Three-dimensional Numerical Simulation on Flow Past Three Circular Cylinders in an Equilateral-Triangular Arrangement

Unsteady Flow Around Two Tandem Cylinders Using Advanced Turbulence Modeling Method

Comparisons of Three Improved DES Methods on Unsteady Flows Past Tandem Cylinders

Evaluation of Numerical Dissipation Sensitivity Using IDDES

NUMERICAL PREDICTION OF MASSIVE SEPARATION AND UNSTEADY FLOWS AROUND BLUFF-BODIES

Numerical Dissipation Effects on Massive Separation Around Tandem Cylinders

Three-Dimensional Flow Around Two Tandem Circular Cylinders with Various Spacing at Re=220

Numerical Investigation of Massively Separated Flows Past RLG Using Advanced DES Approaches

Improvements for the DDES Model with Consideration of Grid Aspect Ratio and Coherent Vortex Structures

Hybrid turbulence models for flows around a stationary smooth circular cylinder

Three-Dimensional Flow Around Two Circular Cylinders in Tandem Arrangement

Numerical Predictions of Flows Past Two Tandem Cylinders of Different Diameters under Unconfined and Confined Flows

Transition-based Constrained Large-Eddy Simulation Method with Application to an Ultrahigh-Lift Low-Pressure Turbine Cascade Flow

Numerical simulations of flow around two circular cylinders in cruciform arrangement and vortex structures analysis

Large-Eddy and Detached-Eddy Simulations of the Separated Flow Around a Circular Cylinder

Simulations of Transition and Separation Past a Wind-Turbine Airfoil Near Stall