Abstract:The supercritical hydrothermal synthesis of nanomaterials has gained significant attention due to its straightforward operation and the excellent performance of the resulting products. In this study, the supercritical hydrothermal method was used with Zn(CH3COO)2·2H2O as the precursor and deionized water and ethanol as the solvent. Nano-ZnO was synthesized under different reaction temperatures (300~500 °C), reaction times (5~15 min), reaction pressures (22~30 MPa), precursor concentrations (0.1~0.5 mol/L), and ratios of precursor to organic solvent (C2H5OH) (2:1~1:4). The effects of synthesis conditions on the morphology and size of ZnO were studied. It was found that properly increasing hydrothermal temperature and pressure and extending the hydrothermal time are conducive to the more regular morphology and smaller size of ZnO particles, which is mainly achieved through the change of reaction conditions affecting the hydrothermal reaction rate. Moreover, the addition of ethanol makes the morphology of nano-zno more regular and significantly inhibits the agglomeration phenomenon. In addition to the change in physical properties of the solvent, this may also be related to the chemical bond established between ethanol and ZnO. The results show that the optimum synthesis conditions of ZnO are 450 °C, 26 MPa, 0.3 mol/L, 10 min, and the molar ratio of precursor to ethanol is 1:3.

Size-controlled synthesis of copper nanoparticles in supercritical water

Size-controlled Synthesis of Copper Oxide Nanoparticles with a Supercritical Hydrothermal Synthesis Method

The mechanism of nanocopper synthesis under supercritical water gasification of methanol

Supercritical Hydrothermal Synthesis of Copper Nanoparticles: Experimental and Kinetic Study

Supercritical Hydrothermal Synthesis of Ultra-Fine Copper Particles Using Different Precursors

Supercritical Hydrothermal Synthesis of Submicrometer Copper(II) Oxide: Effect of Reaction Conditions

Supercritical hydrothermal synthesis of nano-zinc oxide: Process and mechanism

Study on the Synthesis of Nano Zinc Oxide Particles under Supercritical Hydrothermal Conditions

Novel CuS Hollow Spheres Fabricated by a Novel Hydrothermal Method

Phase-Selective Synthesis and Self-Assembly of Monodisperse Copper Sulfide Nanocrystals

Supercritical hydrothermal synthesis of nano-ZnO: Effects of key parameters and reaction mechanism

Innovative Multiphase Ultrasonic-Assisted Method for High-Purity, Stable, and Cost-Effective Copper Nanowire Synthesis

Preparation and microstructure of nano-sized Cu particles by mechanochemical reaction

Innovative Design and Experimental Research on the World's First Pilot Plant for Continuous Supercritical Hydrothermal Synthesis Nano Copper

Synthesis and characterization of the copper nanoparticles

Diameter and Aggregation Controlled Preparation by Solvothermal Synthesis of Ultra-small Particles CuFe$_2$O$_4$

Size Distribution Control of Copper Nanoparticles and Oxides: Effect of Wet-Chemical Redox Cycling

Shape-controlled synthesis of copper sulfide nanocrystals via a soft solution route

Synthesis of copper nanoparticles by a T-shaped microfluidic device

Synthesis of Novel Copper Sulfide Hollow Spheres Generated from Copper (ii)–thiourea Complex

From modification to mechanism: Supercritical hydrothermal synthesis of nano-zirconia