Abstract:In this article, a second-order 3-D bandpass polarization-rotating surface (PRS) that can rotate vertically polarized incident waves by 90° and facilitate the output of horizontally polarized waves is presented. First, each PRS element is constructed using a pair of parallel-coupled slotline sections with open-short-ends, which are etched on vertically and horizontally inserted single-layer printed circuit boards (PCBs), respectively. Then, under vertically polarized incident waves, one of the slotline sections can convert the incident spatial waves into guided waves through its open end. After which, the guided waves are coupled to the other slotline section and the electric field direction will be rotated by 90° through the coupling path, thus leading to a 90° polarization rotation. Subsequently, a direct coupling matrix is used to synthesize and design the proposed PRS based on the microwave filter theory. Investigations reveal that a desirable bandpass filtering response can be obtained by properly designing the internal coupling of the parallel-coupled slotline sections and the external coupling between the incident spatial waves and the PRS. To validate the design concept, two examples with different fractional bandwidths at the same center frequency of 5 GHz and the same return loss of 20 dB were designed, fabricated, and measured. Consequently, a good agreement was attained among the results from coupling matrices, full-wave electromagnetic (EM) simulations, and measurements. All the results demonstrate that the proposed PRSs feature simple topologies, easy fabrications, low insertion losses (ILs), high polarization-rotating ratios, and stable filtering performances under large oblique incidences. In addition, our proposed method can be applied to design higher-order PRSs with sharpened out-of-band roll-off skirts.

A Wideband 90 Degrees Polarisation Rotator Using Split-Ring Resonators

A linear-to-circular polarizer using split ring resonators

High-Efficiency Broadband Polarization Rotator for W-Band Applications

Wide-Band and High-Efficiency 90° Polarization Rotator Based on Tri-Layered Perforated Metal Films

A Broadband Ultra-Thin Polarization Rotator Using Periodically Loaded Parallel Strip-Lines

Design of Circular/Dual-Frequency Linear Polarization Antennas Based on the Anisotropic Complementary Split Ring Resonator

A Design of Dual-Band 90° Polarization Rotator Using Twisted Electric-Field-coupled Resonators

Design and Implementation of High Efficiency and Broadband Transmission-Type Polarization Converter Based on Diagonal Split-Ring Resonator

A Broadband Metamaterial Polarization Converter Based on Split Ring Resonators

High-Order Bandpass Polarization Rotator Based on Aperture-Coupled Patch Resonators

Broadband Reflective Polarization Rotator Built on Single Substrate

Wideband Polarization Splitter and Rotator with Large Fabrication Tolerance and Simple Fabrication Process

Ultra-Compact and Low-Loss Polarization Rotator Based on Plasmonic Waveguide

Wideband Reconfigurable Metasurface for Multi-Angle Linear Polarization Rotation

Frequency-selective Microwave Polarization Rotator Using Substrate-Integrated Waveguide Cavities

Broadband and Low-Crosstalk Polarization Splitter-Rotator with Optimized Tapers

Design of Circular Polarisation Microstrip Patch Antennas with Complementary Split Ring Resonator

O-band reconfigurable silicon polarization rotator

Synthesis of 3-D Polarization-Rotating Surface Based on Orthogonally Inserted Parallel-Coupled Slotlines

Ultra-thin reflective metamaterial polarization rotator based on multiple plasmon resonances

Higher-Order-Mode Assisted Silicon-On-Insulator 90 Degree Polarization Rotator