Abstract:Using the mixture of triethyl phosphate (TEP) and N,N-dimethylacetamide (DMAc) as solvent, PVDF microporous membranes with highly hydrophobic surface were prepared by a modified NIPS method with a dual coagulation process. The effects of the exposure time on these membranes before being immersed into the coagulation bath and the composition in the coagulation bath on precipitation rate, membrane morphology, membrane hydrophobicity, membrane mechanical property, and membrane performance were studied. The morphologies and hydrophobicities of PVDF microporous membranes were investigated by scanning electron microscopy (SEM) and contact angle (CA) measurement. The precipitation processes were observed by light transmittance measurement. The pore size distribution was determined by liquid permeation technique. PVDF microporous membrane obtained by passing evaporation period of 60 min before being immersed into the water bath showed a high water CA of 122.1 degrees. Using ethanol (EtOH) as coagulation bath, the water CAs of the top surface and bottom surface of the membrane increased to 125.9 and 132.6 degrees, respectively. To further improve PVDF membrane hydrophobicity, a dual coagulation process was used and the mixed solvent (TEP-DMAc) was added into the first coagulation bath for 30 sec. Increase in the TEP-DMAc content led to the change in the morphology type of the membrane, that is, from an asymmetric structure with a dense top surface to a symmetric structure with a skinless top surface, and the pore size distribution widened greatly. By increasing the mass ratio of TEP to DMAc, the denseness of the membrane surface decreased significantly. Adding 60 wt% of TEP-DMAc to the first coagulation bath and the mass ratio of TEP to DMAc was 60: 40, the CA reached to a maximum as high as 136.6 degrees, and PVDF microporous membrane showed a high porosity of 80% and an excellent mechanical property of 3.14MPa tensile strength and 61.79% elongation ratio. Copyright (C) 2009 John Wiley & Sons, Ltd.

Preparation and characterization of PDMS-PVDF hydrophobic microporous membrane for membrane distillation

Preparation and Characterization of Pvdf-Hfp Microporous Membrane by Template Method

Preparation and characterization of hydrophobic PVDF membranes by vapor-induced phase separation and application in vacuum membrane distillation

Preparation and Characterization of PVDF/nonwoven Fabric Flat-Sheet Composite Membranes for Desalination Through Direct Contact Membrane Distillation

Preparation and modification of PVDF membrane via VIPS method for membrane distillation

SiO2-PDMS-PVDF Hollow Fiber Membrane with High Flux for Vacuum Membrane Distillation

Structuring and characterization of a novel microporous PVDF membrane with semi-interpenetrating polymer networks for vacuum membrane distillation

PDMS/PVDF Microporous Membrane with Semi‐interpenetrating Polymer Networks for Vacuum Membrane Distillation

Morphological and hydrophobic modifications of PVDF flat membrane with silane coupling agent grafting via plasma flow for VMD of ethanol–water mixture

Hydrophobic modification of PVDF hollow fiber membranes using polydimethylsiloxane for VMD process

Effect of Spinning Conditions on the Structure and Performance of Hydrophobic PVDF Hollow Fiber Membranes for Membrane Distillation

Beaded electrospun polyvinylidene fluoride (PVDF) membranes for membrane distillation (MD)

Engineering the Re-Entrant Hierarchy and Surface Energy of PDMS-PVDF Membrane for Membrane Distillation Using a Facile and Benign Microsphere Coating.

Preparation of Hydrophobic PVDF Hollow Fiber Membranes for Desalination Through Membrane Distillation.

Preparation and morphological characterization of narrow pore size distributed polypropylene hydrophobic membranes for vacuum membrane distillation via thermally induced phase separation

Preparation of hydrophobic zeolitic imidazolate framework-71 (ZIF-71)/PVDF hollow fiber composite membrane for membrane distillation through dilute solution coating

Tailored PVDF Membrane with Coordinated Interfacial Nano/micro-Structure for Enhanced Membrane Distillation

Fabrication of polyvinylidene fluoride (PVDF) nanofiber membranes by electro-spinning for direct contact membrane distillation

Preparation and Characterization of Pvdf Microporous Membrane with Highly Hydrophobic Surface

PVDF membranes for membrane distillation prepared by VIPS – A combined study of artificial water channel effectiveness and membrane performance prediction

Exploiting the Interplay between Liquid-Liquid Demixing and Crystallization of the PVDF Membrane for Membrane Distillation