Abstract:Single pulse (SP) excitation is the conventional method in long bone assessment which uses ultrasonic guided waves (GWs). However, the SP excitation will result in a small amplitude and low signal-to-noise ratio (SNR) of received signals due to the high attenuation during propagation. To solve the problem, this paper used coded excitation instead, which could help to improve the SNR of received signals. In simulations and in vitro experiments, the GWs were excited by 13 bits Barker code (BC) and 17 bits optimal binary code (OBC), then the received signals were decoded with weighted match filter (WMF) and finite impulse response least squares inverse filter (FIR-LSIF), respectively. The results showed good consistency between simulations and in vitro experiments. Besides ensuring the accuracy and authenticity of signals, the 13-bits BC and 17-bits OBC both got a larger amplitude and a better SNR than single pulse excitation. In the case of strong noise (SNR = 0 dB), the correlation coefficient between received signals and reference signals dropped to 0.70 when using single pulse excitation, while the correlation coefficient still remained above 0.95 for coded excitation. Furthermore, coded excitation modulated by 0.2 MHz sine wave had produced only two modes, L(0,1) and L(0,3), in received signals. When the depth of fracture varying from 0 to 0.5 mm, the energy mainly concentrated in L(0,3) mode. However, the energy mainly concentrated in L(0,1) mode when the depth of fracture varying from 0.5 to 5.0 mm. Therefore, the depth of fracture in long bone could be estimated based on energy transmission percentages.

A Simulation and Experimental Study of Long Cortical Bones Fracture Evaluation Using Lamb Waves

Long Cortical Bone Fracture Evaluation Using Ultrasonic Guided Waves: A Tubular Phantom Study

Axial Transmission Method for Long Bone Fracture Evaluation by Ultrasonic Guided Waves: Simulation, Phantom and in Vitro Experiments.

Quantitative Evaluation of Long Bone Fractures by Ultrasonic Guided Waves

Quantification of Guided Mode Propagation in Fractured Long Bones

Quantitative Evaluation of Fracture Healing Process of Long Bones Using Guided Ultrasound Waves: a Computational Feasibility Study.

Simulation Of Propagation Characteristics Of Ultrasonic Guided Waves In Fractured Long Bone

Fatigue Evaluation of Long Cortical Bone Using Ultrasonic Guided Waves.

Effect of Elastic Modulus on the Nonlinear Ultrasonic Lamb Waves in Cortical Bone: A Numerical Study

Ultrasonic Guided Waves Dispersion Reversal for Long Bone Thickness Evaluation: A Simulation Study

Simulation of acoustic guided wave propagation in cortical bone using a semi-analytical finite element method.

Extraction of the First-Arriving-Signal and Fundamental Flexural Guided Wave Using a Radon Transform Based Approach Applied to Ultrasonic Characterization of Cortical Bone

Identification and analysis of multimode guided waves in tibia cortical bone.

Coded Excitation of Guided Ultrasonic Waves in Long Bone for Assessment of Fracture Depth

Coded Excitation of Ultrasonic Guided Waves in Long Bone Fracture Assessment

Cortical bone plate properties assessment using inversion of axially transmitted low frequency ultrasonic guided waves

Multichannel Wideband Mode-Selective Excitation of Ultrasonic Guided Waves in Long Cortical Bone

Imaging cracks in bones using acoustic nonlinearity: A simulation study

A simulation study of ultrasonic imaging of micro-crack in bone based on time-reversed approach

Measurement of the dispersion and attenuation of cylindrical ultrasonic guided waves in long bone.

Visualization of ultrasonic-guided-wave propagation behaviors in human long bone