Abstract:AbstractThe application of horizontal well drilling coupled with the multistage fracturing technology enables commercial development of shale gas formations. To optimize the shale gas development, the transient gas flow in a shale formation is of great research interest. Due to anano-scale pore radius, the gas flow in shale matrix may fall in flow regimes which include viscous flow, slip flow and Knudsen diffusion. On top of that, gas adsorption/desorption and stress-sensitivity are some other important phenomena in shales. In this paper, we introduce a novel numerical simulation scheme to depict the above phenomena and predict the gas production from a multi-stage fractured horizontal well, which is crucial for the shale gas development.Instead of Darcy's equation, we implement the apparent permeability in the continuity equation to depict the gas flow (viscous flow, slip flow and Knudsen diffusion) in shale matrix. An adsorption/desorption term is included in the continuity equation as an accumulation term. A sink which is based on Peaceman's well model is placed at the center of the fracture cell. Uniform fluid flow from matrix to fractures is assumed. Only viscous flow is considered in the fractures and the permeability of the fractures doesnot change with pressure. The model is validated via comparing with an infinity-conductivity fracture model. Moreover, the lab data of Eagle Ford shale which provides the relationship between matrix permeability and the effective stress is integrated into the two-way coupling geomechanical process to simulate a stress-sensitive shale formation. Furthermore, the Langmuir and BET models will be compared to investigate the detailed adsorption/desorption process.This methodology examines the influence of each mechanism for the transient shale gas flow. Instead of conventional pressure-independent Darcy permeability, the apparent permeability increases with the development of a shale gas reservoir, which leads to higher productivity. With the gas adsorption/desorption, the reservoir pressure is maintained via the supply of released gas from nano-scale pore wall surfaces, which also leads to higher gas production. In addition, it yields a 5% difference for the cumulative production for one yearbetween the Langmuir and BET models. With the consideration of geomechanics, the apparent permeability is decreased due to the compaction of nano-scale pores, which leads to a decrease in productivity. Due to the difference of compaction magnitude for each grid block, geomechanics creates additional heterogeneity for anano-pore network in a shale formation, which we should pay more attention to.A novel methodology is introduced to examine the crucial phenomena in a shale formation, which simultaneously takes into account the influence of flow regimes, gas adsorption/desorption and stresssensitivity. On top of that, the productivity of a multi-stage fractured horizontal well is quantified. We provide an effective way to quantify the above effects for the transient gas flow in shale formations.

Effect of Distinguishing Apparent Permeability on Flowing Gas Composition, Composition Change and Composition Derivative in Tight- and Shale-Gas Reservoir

Simulation of Gas Transport in Tight/Shale Gas Reservoirs by a Multicomponent Model Based on PEBI Grid

Effect of Adsorption and Permeability Correction on Transient Pressures in Organic Rich Gas Reservoirs: Vertical and Hydraulically Fractured Horizontal Wells

Effect of distinguishing apparent permeability for different components on BHP and produced gas composition in tight- and shale-gas reservoir

Gas Mass Transfer Characteristics in Shales: Insights from Multiple Flow Mechanisms, Effective Viscosity, and Poromechanics

Pressure Transient Behaviors of Hydraulically Fractured Horizontal Shale-Gas Wells by Using Dual-Porosity and Dual-Permeability Model

Effect of Matrix-Wellbore Flow and Porosity on Pressure Transient Response in Shale Formation Modeling by Dual Porosity and Dual Permeability System

An Apparent Permeability Model in Organic Shales: Coupling Multiple Flow Mechanisms and Factors

A Dynamic Permeability Model in Shale Matrix after Hydraulic Fracturing: Considering Mineral and Pore Size Distribution, Dynamic Gas Entrapment and Variation in Poromechanics

Apparent Permeability Model for Shale Gas Reservoirs Considering Multiple Transport Mechanisms

Transverse permeability measurements of gas shales under replicated in-situ flow conditions: Mathematical modeling and laboratory testing

Apparent Permeability for Gas Transport in Nanopores of Organic Shale Reservoirs Including Multiple Effects

Composition-Transient Analysis in Shale-Gas Reservoirs with Consideration of Multicomponent Adsorption

Simulation of Shale Gas Reservoir Production Considering the Effects of the Adsorbed Water Layer and Flow Differences

Modeling of Permeability for Ultra-Tight Coal and Shale Matrix: A Multi-Mechanistic Flow Approach

Estimation of Shale Apparent Permeability for Multimechanistic, Multicomponent Gas Production Using Rate Transient Analysis

A Novel Integrated Numerical Simulation Scheme for Transient Gas Flow in Shale Matrix

Image-based model for dynamic apparent gas permeability in Organic-rich shales

An Integrated Numerical Simulation Scheme to Predict Shale Gas Production of a Multi-Fractured Horizontal Well

Gas Migration in the Reservoirs of Ultra-Low Porosity and Permeability Based on an Improved Apparent Permeability Model

Apparent Permeability Model for Gas Transport in Multiscale Shale Matrix Coupling Multiple Mechanisms