Abstract:Compared to conventional fracturing techniques, foam fracturing has numerous advantages, including good shear resistance, strong sand carrying capacity, low fluid loss, low damage, and fast return rates. It is particularly suitable for stimulation in low pressure, low permeability, and water-sensitive formations. Specifically, CO 2 foam fracturing is crucial in energy savings and emission reductions, controlling the expansion of reservoir clay minerals, reducing crude oil viscosity, and improving the production of water-locked reservoirs. In this paper, we investigate the foam fracturing fluid and evaluate its performance. We selected thickeners with good foaming stability and foaming agents with excellent performance at low dosage levels, based on experimental evaluation. We finally determined the formulation of the foam fracturing fluid by analyzing the experimental data, such as foam half-life, foam mass, and viscosity. We experimentally evaluated the viscosity, static sand settling properties, and rheological properties of the fluid. After being tested on the reservoir core, the foam fracturing fluid has a viscosity of 2 mPas. Moreover, the residue content is 1.1 mg/L, the surface tension is 24.5 mN/m, and the interfacial tension is 1.5 mN/m. The fluid-carrying sand experiment of 40–70 mesh ceramic particles, commonly used in shale gas fracking, was evaluated. The sand-to-liquid ratio was set at 40% for the static sand-carrying experiment. The flow of the fluid-carrying sand was good, and the settling property was satisfactory for 3 h. We used shale reservoir cores from well W-1 to assess the rate of foam fracture, which was less than 19%. Under the experimental conditions of a shear rate of 170 S −1 and a temperature of 90°C, the viscosity of fracturing fluid was measured to be greater than 50 mPas, 90 min after shear, demonstrating the excellent temperature and shear resistance of the foam fracturing fluid. Using CO 2 foam fracturing fluid can significantly improve the reconstruction effect of low permeability hydrocarbon reservoirs (especially unconventional reservoirs) and solve problems related to water resources and environmental protection during the process of oil and gas reservoir development. It will be a major factor in improving construction impacts and addressing water and environmental concerns for low permeability hydrocarbon reservoirs, particularly unconventional ones that utilize CO 2 foam fracturing fluids.

Experimental Study on the Rheology of CO2 Viscoelastic Surfactant Foam Fracturing Fluid

Experimental Study on Frictional Resistance Characteristics of CO2-Emulsified Viscoelastic Surfactant Fracturing Fluid

Experimental Evaluation of the Rheological Properties and Influencing Factors of Gel Fracturing Fluid Mixed with CO2 for Shale Gas Reservoir Stimulation

Experimental Research on Rheological Properties of Slick Water Mixed with CO2 System

Effects of Temperature and Pressure on Rheology and Heat Transfer among Bubbles in Waterless CO2-based Foam Fracturing Fluid

Study on Two-Phase Flow of CO2 Foam Fracturing Fluid in Fissures

Experimental Research on Rheological Properties and Proppant Transport Performance of GRF–CO2 Fracturing Fluid

CHARACTERIZATION OF VISCO-ELASTICITY AND THIXOTROPY FOR CO2 FOAM FRACTURING FLUIDS

Convection heat transfer and friction characteristics of liquid CO2-N2 foam fracturing fluid using C4F9OCH3 as frother

Effect of foam quality on flow behavior of liquid CO2-based foam fracturing fluid stabilized by hydrofluoroether

A Novel CO2 and Pressure Responsive Viscoelastic Surfactant Fluid for Fracturing

Experimental Investigation on Heat Transfer Characteristics of CO<sub>2</sub>-Based Foam Fracturing Fluid

Experimental Investigation on Rheological Properties and Friction Performance of Thickened CO2 Fracturing Fluid

Variations and Model of the Rheological Parameters of Low Damage BCG − CO2 Fracturing Fluid

Experimental Investigation on Heat Transfer Characteristics of Co2-Based Foam Fracturing Fluid

Laboratory study of the Non-Newtonian behavior of supercritical CO2 foam flow in a straight tube

Study on Performance of CO_2 Foam Fracturing Fluid

Preparation and Performance Evaluation of CO2 Foam Gel Fracturing Fluid

CO2 Foamed Viscoelastic Gel-Based Seawater Fracturing Fluid for High-Temperature Wells

Research and performance optimization of carbon dioxide foam fracturing fluid suitable for shale reservoir

CONVECTIVE HEAT TRANSFER OF CO2 FOAM FRACTURING FLUID UNDER DOWNHOLE CONDITIONS