Abstract:The hydrodynamic information of liquid oxygen in the conveying pipeline of cryogenic launch vehicles directly determines the reliability of the operation of the turbopump. A 0.09 MPa anomalous pressure fall phenomenon in the feeding system has been observed during the flight and run test of a cryogenic rocket with four parallel engines. In previous work, we set up a full-scale experimental system with liquid oxygen as media. The anomalous pressure fall was successfully reproduced. Experimental studies of this phenomenon suggest that the problem might be associated with vortices into the five-way spherical cavity structure. The objective of this study was to determine the three-dimensional instability flow by computational methods to identify and better understand the anomalous pressure fall phenomenon. A numerical model developed by the turbulent conservation equations was validated by experimental data. The generation and evolution of vortices into the five-way spherical cavity of feeding pipelines was captured. It was found that the root cause of the instability flow causing the unusual pressure fall is the formation of a spindle-like vortex into the five-way spherical cavity due to disturbance of the inlet liquid oxygen. The results showed that there is a mirror-symmetrical four-vortices structure in the absence of disturbance, in which the liquid oxygen pressure fall with the rise of the Reynolds number is in good agreement with the predicting values calculated by a set of traditional empirical correlations. In the case of the specific operating conditions, it is also consistent with the experimental results. When the disturbance occurs at the inlet of the spherical cavity, the mirror-symmetrical four-vortices structure gradually evolves into the mirror-symmetrical two-vortices structure. When the disturbance is further enhanced, the mirror-symmetrical two-vortices structure merge with each other to form a spindle-like vortex, which is similar to the Rankine vortex structure. The pressure fall on the corresponding side of the spindle-like vortex core reduces abnormally, and is about 0.07 MPa, which is consistent with the experimental data under certain disturbance conditions. Moreover, it was found that the spindle-like vortex is a stable eddy structure, and would continue to exist once it is formed, which could also not disappear with the removal of the disturbance.

New Pogo Analysis Method Using Rational Fitting and Three-Dimensional Tank Modeling

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

Modeling and Stability Analysis of Pogo Vibration in Liquid-Propellant Rockets with a Two-Propellant System

A Nonlinear Model on the Simulation of Pogo Vibrations in Liquid Rockets

Pogo Stability Approaches for the Strap-On Launch Vehicle with Staged Combustion Cycle Engines

Analysis on Stability of POGO and Parameters of Propulsion System in Liquid Rocket

Finite Element Analysis of Propellants Slosh in Spherical Tank under Micro Gravity

Finite-Element Modeling and Frequency-Domain Analysis of Liquid-Propulsion Launch Vehicle

Research and Parameter Analysis of POGO Vibration in Liquid Rocket

Transient Modelling Of Pressure-Controlled Propellant Crossfeed For Liquid Rocket

Effects of Damping Ratio and Critical Coupling Strength on Pogo Instability

Numerical Investigation on Instability Flow Behaviors of Liquid Oxygen in a Feeding Pipeline with a Five-Way Spherical Cavity

Finite Element Method in Determining Coefficients of Fluid-Solid Coupling Longitudinal Oscillator Model for Propellant Tanks

Numerical Study on Temperature Distribution of Tank Pressurization Process of Liquid Rocket During Outflow

Analysis of Liquid Sloshing in Partially Filled Tank of Spacecraft During Maneuver

EXPERIMENT AND FEM ANALYSIS OF LIQUID SLOSHING WITH SMALL AMPLITUDE IN A CIRCULAR CYLINDRICAL TANK WITH A SPHERICAL BOTTOM

The Simulate Target Practice Analysis on the Stability of POGO Vibration System in Liquid Rockets

Numerical and Experimental Study on the Nonlinear Liquid Sloshing in Cassini Tank

Numerical Simulation on Interface Evolution and Pressurization Behaviors in Cryogenic Propellant Tank on Orbit

Large-Amplitude Sloshing Analysis and Equivalent Mechanical Modeling in Spherical Tanks of Spacecraft

Numerical investigation of liquid oxygen filling process in liquid rocket engine by a multi-dimensional co-simulation method