Abstract:Additive manufacturing (AM) is known to generate large magnitudes of residual stresses (RS) within builds due to steep and localized thermal gradients. In the current state of commercial AM technology, manufacturers generally perform heat treatments in effort to reduce the generated RS and its detrimental effects on part distortion and in-service failure. Computational models that effectively simulate the deposition process can provide valuable insights to improve RS distributions. Accordingly, it is common to employ Computational fluid dynamics (CFD) models or finite element (FE) models. While CFD can predict geometric and thermal-fluid behavior, it cannot predict the structural response (e.g., stress–strain) behavior. On the other hand, an FE model can predict mechanical behavior, but it lacks the ability to predict geometric and fluid behavior. Thus, an effectively integrated thermofluidic-thermomechanical modeling framework that exploits the benefits of both techniques while avoiding their respective limitations can offer valuable predictive capability for AM processes. In contrast to previously published efforts, the work herein describes a one-way coupled CFD-FEA framework that abandons major simplifying assumptions, such as geometric steady-state conditions, the absence of material plasticity, and the lack of detailed RS evolution/accumulation during deposition, as well as insufficient validation of results. The presented framework is demonstrated for a directed energy deposition (DED) process, and experiments are performed to validate the predicted geometry and RS profile. Both single- and double-layer stainless steel 316L builds are considered. Geometric data is acquired via 3D optical surface scans and X-ray micro-computed tomography, and residual stress is measured using neutron diffraction (ND). Comparisons between the simulations and measurements reveal that the described CFD-FEA framework is effective in capturing the coupled thermomechanical and thermofluidic behaviors of the DED process. The methodology presented is extensible to other metal AM processes, including power bed fusion and wire-feed-based AM.

Design and Evaluation of Fully Configured Models Built by Additive Manufacturing

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Finite Element Modeling of Additive Manufacturing in Case of Metal Parts

Combination of topology and shape optimization with finite element modeling in the case of an aerospace component produced by laser based additive manufacturing

An integrated process–structure–property modeling framework for additive manufacturing

A Novel High-Efficiency Methodology for Metal Additive Manufacturing

Metal additive manufacturing in aircraft: current application, opportunities and challenges

A review of computational modeling in powder-based additive manufacturing for metallic part qualification

Additive Manufacturing Redesigning of Metallic Parts for High Precision Machines

Low Observable Uncrewed Aerial Vehicle Wind Tunnel Model Design, Manufacturing, and Aerodynamic Characterization

Exploring Multi-Fidelity Aeroelastic Tailoring: Prospect and Model Assessment

Computer aided simulation and performance evaluation of additive manufacturing technology for component parts manufacturing

Multi-fidelity multidisciplinary meta-model based optimization of a slender body with fins

Numerical Modeling Design for the Hybrid Additive Manufacturing of Laser Directed Energy Deposition and Shot Peening Forming Fe–Cr–Ni–B–Si Alloy

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

Metal additive-manufacturing process and residual stress modeling

Damage modeling in additive manufacturing processes for metals

Experimental and numerical analysis of the consolidation process for additive manufactured continuous carbon fiber-reinforced polyamide 12 composites

An innovative approach to a UAV tails structural design for additive manufacturing

Reliable method of aerodynamic analysis using computational fluid dynamics and scaled models in the development process of a Very Light Airplane

Autonomous intelligent additive manufacturing of continuous fiber-reinforced composites: data-enhanced knowledgebase and multi-sensor fusion