Modulation Measuring Profilometry with Cross Grating Projection and Single Shot for Dynamic 3d Shape Measurement
Mingteng Lu,Xianyu Su,Yiping Cao,Zhisheng You,Min Zhong
DOI: https://doi.org/10.1016/j.optlaseng.2015.12.011
IF: 5.666
2016-01-01
Optics and Lasers in Engineering
Abstract:In order to determine Dynamic 3-D shape with vertical measurement mode, a fast modulation measuring profilometry (MMP) with a cross grating projection and single shot is proposed. Unlike the previous methods, in our current projection system, one cross grating is projected by a special projection lens consisting of a common projection lens and a cylindrical lens. Due to the characteristics of cylindrical lens, the image of the vertical component and the horizontal component of the cross grating is separated in the image space, and the measuring range is just the space between the two image planes. Through a beam splitter, the CCD camera can coaxially capture the fringe pattern of the cross grating modulated by the testing object׳s shape. In one fringe pattern, by applying Fourier transform, filtering and inverse Fourier transform, the modulation corresponding to the vertical and horizontal components of the cross grating can be obtained respectively. Then the 3-D shape of the object can be reconstructed according to the mapping relationship between modulation and height, which was established by calibration process in advance. So the 3-D shape information can be recorded at the same speed of the frame rate of the CCD camera. This paper gives the principle of the proposed method and the set-up for measuring experiment and system calibration. The 3-D shape of a still object and a dynamic process of liquid vortex were measured and reconstructed in the experiments, and the results proved the method’s feasibility. The advantage of the proposed method is that only one fringe pattern is needed to extract the modulation distribution and to reconstruct the 3-D shape of the object. Therefore, the proposed method can achieve high speed measurement and vertical measurement without shadow and occlusion. It can be used in the dynamic 3-D shape measurement and vibration analysis.