Abstract:Curvature measurement plays an important role in structural health monitoring, robot-pose measuring, etc. High-resolution curvature measurement is highly demanded. In this paper, an optical curvature sensor with high resolution based on in-fiber Mach-Zehnder interferometer (MZI) and microwave photonic filter (MPF) is proposed and experimentally demonstrated. The in-fiber MZI is constructed with a ring-core fiber (RCF) which is fusion spliced between two coreless fibers (CLFs). The structure of CLF-RCF-CLF is then sandwiched between two segments of single-mode fiber (SMF), making the whole interferometer structure of SMF-CLF-RCF-CLF-SMF. The operating principle is that different curvatures will cause the variations of the interference spectrum of MZI due to elastic-optic effect, and then the variations are converted into the frequency-shift of the MPF. The factors affecting the visibility of the interference spectrum are researched. A preliminary exploration of the multiplexing demodulation for the in-fiber-MZIs is also investigated and discussed, which is for the first time to the best of our knowledge, holding great potential to pave the way for constructing the sensing network composed of interferometric sensors. The curvature measurement sensitivity is -147.634 MHz/m(-1), and the resolution is 6.774 x 10(-6) m(-1) which is the highest value up to now. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement

Asymmetrical In-Fiber Mach-Zehnder Interferometer for Curvature Measurement.

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Curvature and Temperature Measurement Based on a Few-Mode PCF Formed M-Z-I and an Embedded FBG.

Highly Sensitive Curvature Sensor Based on an Asymmetrical Mach–Zehnder Interferometer

An In-Fiber Mach-Zehnder Interferometer Based on Dual Side-Hole Fiber for Highly Sensitive Measurement of Curvature

Fiber Mach-Zehnder Interferometer Based on Multi-Mode Fiber and Up-Taper for Curvature Sensing Applications

A Curvature Mach-Zehnder Interferometer Fiber Sensor Based on Triple Cladding and Coreless Fiber

Simultaneous Curvature and Temperature Sensing Based on a Novel Mach-Zehnder Interferometer

Curvature Measurement with Photonic Crystal Fiber Based Mach-Zehnder Interferometer

High-Sensitivity Curvature Fiber Sensor Based on Miniature Two-Path Mach-Zehnder Interferometer

In-Line Mach-Zehnder Interferometer with D-Shaped Fiber Grating for Temperature-Discriminated Directional Curvature Measurement

Optical curvature sensor with high resolution based on in-line fiber Mach-Zehnder interferometer and microwave photonic filter

A Fiber Sensor for Different Curvature Measurement Based on Nano-Erbium-ytterbium Co-Doped Fiber Cascade Structure As Both Source and Sensor

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Temperature and Curvature Microfiber Mach-Zehnder Interferometer Sensor Based on Double Peanut-Shaped Structures and Tapered Coreless Fiber

A dual-parameter sensing system for temperature and curvature based on Nano-EYDF and in-line cascaded Mach-Zehnder interferometer

Highly Sensitive Optical Fiber Curvature Sensor Based on a Seven-Core Fiber with a Twisted Structure.

High-sensitivity Bend Sensor Based on Mach-Zehnder Interferometer Using Photonic Crystal Fiber

Highly sensitive curvature sensors based on polarization-maintaining photonic crystal fibers

Fiber-Optic Bending Vector Sensor Based on Mach -Zehnder Interferometer Exploiting Lateral-Offset and Up-Taper

Biconical-Taper-Assisted Fiber Interferometer with Modes Coupling Enhancement for High-Sensitive Curvature Measurement