Numerical Study on the Field-Scale Criterion of Hydraulic Fracture Crossing the Interface Between Roof and Broken Low-Permeability Coal

Hao Li,Weiguo Liang,Yulong Jiang,Pengfei Wu,Jianjun Wu,Wei He

DOI: https://doi.org/10.1007/s00603-021-02539-3

IF: 6.518

2021-06-19

Rock Mechanics and Rock Engineering

Abstract:In areas of broken soft and low-permeability coal, indirect hydraulic fracturing (HF) coal is a technology with great potential to increase coal bed methane (CBM) production. The key to success of the technology is that HFs can cross the coal–rock interface from the roof and propagate into the coal. To this end, this article focuses on the roots that hinder the HFs propagating enough in the coal, that is, the significant inelastic deformation and abundant discontinuities of the coal. Based on CT experiments and nonlinear mechanics-seepage theory, a 3D discontinuities network model and plastic-nonlinear fracture-seepage coupled constitutive equations were established, respectively. On this basis, 115 numerical calculation models were established to study the field-scale criterion of HFs crossing coal–rock interface under the influence of three factors, including the distance between horizontal well and interface (<i>D</i>_op), interface friction coefficient (<i>f</i>_c,i) and in-situ stress difference (Δ<i>σ</i>). The results show that the critical <i>f</i>_c,i is positively correlated with <i>D</i>_op and negatively correlated with Δ<i>σ</i>. Once the <i>D</i>_op exceeds 2 m, more than 80% of the hydraulic energy will be consumed in the nonlinear mechanical behavior and mixed fracture mode of coal, which will lead to the difficulty of HFs propagation. In-situ experiments show that, by reducing <i>D</i>_op, optimizing the landing of the horizontal well (i.e. increasing Δ<i>σ</i> and <i>f</i>_c,i), and maintaining high hydraulic energy (or injection rate), the daily CBM production by indirect fracturing technology is 10 times higher than that without parameter optimization, exceeding 3000m³/d. The "field-scale criterion" obtained in this article will provide theoretical support for increasing the success rate of indirect fracturing coal technology in areas of broken low-permeability coal.

geosciences, multidisciplinary,engineering, geological

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how the Hydraulic Fracturing (HF) technology can successfully pass through the interface between the roof and the coal seam in the fractured soft low - permeability coal seam to increase the production of Coal Bed Methane (CBM). Specifically, the paper focuses on how to overcome the following two key obstacles:

1. **Significant plastic deformation**: Fractured soft low - permeability coal has significant plastic deformation characteristics, which will cause a large amount of hydraulic energy to be consumed in plastic work rather than being used to form new fracture surfaces, thus hindering the propagation of HF.

2. **Abundant discontinuities**: A large number of discontinuities (such as fractures) in the coal seam will cause HF to deflect, forming a more energy - consuming mixed or shear fracture mode, further limiting the effective propagation of HF.

In order to achieve the successful application of indirect hydraulic fracturing technology, the paper established a 3D discontinuous network model and a plastic - non - linear fracture - seepage coupling constitutive equation, and studied the field - scale criteria for HF to cross the coal - rock interface under the influence of factors such as the distance between the horizontal well and the interface (Dop), the interface friction coefficient (fc,i) and the in - situ stress difference (Δσ) through numerical simulation. The research results show that by optimizing these parameters, the success rate of the indirect hydraulic fracturing technology can be significantly improved, thereby greatly increasing the CBM production in the fractured soft low - permeability coal seam.