Abstract:We propose a novel hybrid FPP-DIC technique to measure an object's shape and deformation in 3D simultaneously by using a single 3CCD color camera, which captures the blue fringe patterns and red fluorescent speckles within the same image. Firstly, red fluorescent speckles were painted on the surface of the specimen. Subsequently, 12 computer-generated blue fringe patterns with a black background were projected onto the surface of the specimen using a DLP projector. Finally, both the reference and deformed images with three different frequencies and four shifted phases were captured using a 3CCD camera. This technique employed a three-chip configuration in which red–green–blue chips were discretely integrated in the 3CCD color camera sensor, rendering independent capture of RGB information possible. Measurement of out-of-plane displacement was carried out through the implementation of Fringe Projection Profilometry (FPP), whereas the in-plane displacement was evaluated using a 2D Digital Image Correlation (DIC) method by leveraging a telecentric-lens-based optical system. In comparison to the traditional FPP-DIC hybrid methodology, the present approach showed a lower incidence of crosstalk between the fringe patterns and speckle patterns while also offering a corrective for the coupling of the in-plane displacement and out-of-plane displacement. Experimental results for the in-plane cantilever beam and out-of-plane disk comparisons with the traditional 3D-DIC method indicated that the maximum discrepancy obtained between FPP-DIC and 3D-DIC was 0.7 μm and 0.034 mm with different magnifications, respectively, validating the effectiveness and precision of the novel proposed FPP-DIC method.

A Novel Technique for Measuring 3D Deformation of Adhesively Bonded Single Lap Joint

A flexible and easy-to-implement single-camera microscopic 3D digital image correlation technique

Method for Visualizing the Shear Process of Rock Joints Using 3D Laser Scanning and 3D Printing Techniques

Accurate Three-Dimensional Shape and Deformation Measurement at Microscale Using Digital Image Correlation.

Fabrication of a DIC Sensor for In-Plane Deformation Measurement

Single-camera microscopic stereo digital image correlation using a diffraction grating

Single-camera 3D-DIC System Based on a Fiber Bundle

Three-dimensional shape and deformation measurement on complex structure parts

Single‐camera Special Stereo‐digital Image Correlation Applied for Accurate Virtual Fields Method Identification

Single-lens 3D Digital Image Correlation System Based on a Bilateral Telecentric Lens and a Bi-Prism: Validation and Application

A Simple and Practical Single-Camera Stereo-Digital Image Correlation Using a Color Camera and X-Cube Prism

Three-Dimensional Shape and Deformation Measurements Based on Fringe Projection Profilometry and Fluorescent Digital Image Correlation via a 3 Charge Coupled Device Camera

Full-field Transient 3D Deformation Measurement of 3D Braided Composite Panels During Ballistic Impact Using Single-Camera High-Speed Stereo-Digital Image Correlation

Coaxial panoramic 3D-DIC system for full inner surface deformation measurement

Single-Camera Three-Dimensional Digital Image Correlation with Enhanced Accuracy Based on Four-View Imaging

Simultaneous Measurement of External and Internal Surface Shape and Deformation Based on Photogrammetry and Stereo-Dic

Three-dimensional digital image correlation system for deformation measurement in experimental mechanics

Study on the Mechanical Behavior of Adhesive Interface by Digital Image Correlation

A new mark shearing technique for strain measurement using digital image correlation method.

Application of Digital Image Correlation Method to In-Situ Dynamic Strain Measurement

Study on the technologies of rapid three-dimension optical measurement for spatial tubular joints deformation