Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

An Analytical Model to Predict Material Gradient and Anisotropy in Bamboo

Large Rotations of Bamboo Strips: Experiments and Modeling in OpenSeesPy

Analysis of the hollow structure with functionally gradient materials of moso bamboo

Micromechanical Modeling in Determining the Transverse Elastic Moduli and Stress Distributions of Bamboo

Evaluation of orthotropic elasticity of gradient-structured bamboo by microtensile testing combined with digital image correlation technique

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

Analyzing the structure of bamboo culms using computer vision and mechanical simulation

Nonlinear modeling of bamboo fiber reinforced composite materials

Mechanical Behavior of Bamboo-Like Structures under Transversal Compressive Loading

Bamboo‐Inspired Structurally Efficient Materials with a Large Continuous Gradient

Analysis of effective elastic parameters of natural bamboo honeycomb cell structure

Gradient variations of cellulose supramolecular structures in moso bamboo culm: from nano- to microhorizons

Effects of integrated process of flattening and densification on the gradient structure and properties of Moso Bamboo

Effects of Anisotropy and Radial Gradient Variation on Tensile Shear Strength of Moso Bamboo

Stress-strain constitutive models along the grain of original bamboo based on classification

Stiffness and stability of bamboo stem- A optimal design perspective

Bamboo as a substitute for plastic: Underlying mechanisms of flexible deformation and flexural toughness of bamboo at multiple scales

Bamboo's tissue structure facilitates large bending deflections

Relationship between mechanical properties and height-diameter ratio of moso bamboo

Anisotropic Mechanical Properties and Composite Model of Parallel Bamboo Strand Lumbers