Abstract:Chinese Fusion Engineering Test Reactor (CFETR) is a new test tokamak device being designed in China aimed to bridge gaps between ITER and DEMO. As one of the candidate tritium breeding blankets, a conceptual design scheme of the helium cooled solid breeder blanket has been proposed and a series of preliminary analyses have been carried out to access the performances. However, both the required global tritium breeding ratio for CFETR not less than 1.2 and its poor working conditions under intense radiation need further thorough neutronics analyses and optimizations during the design phase. In this work, first, three-dimensional neutronics model of CFETR was built, and the neutron wall loading and global TBR were obtained. The nuclear and thermal calculation results were automatically coupled, which could make the neutronics calculation results more accurate and guaranteed they could always satisfy the corresponding thermal limits during the whole process. Then, the tritium breeding and shielding performances of both the outboard and inboard equatorial blanket modules were optimized for the comprehensive optimal schemes. The influences of Be/W armors on the shielding performance and TBR were also investigated. Finally, the nuclear heating rates and the neutron flux densities in different components were calculated based on the obtained comprehensive optimal scheme. In this paper, the neutronics analyses and optimizations verified that the optimized conceptual design could well meet the tritium self-sufficiency and neutron shielding requirements, and this could provide a valuable reference for the further thermal-hydraulic analysis and structural optimization of the CFETR helium cooled solid breeder blanket.

Conceptual Design and Finite Element Analysis of STR-3 Feeder for ITER

Structural Integrity Analysis for Final Design of ITER Gas Fueling Manifold

Investigation on Structural Design and Coupled Finite Element Analysis of CS 3L Feeder for ITER

Conceptual Design and Analysis of Cold Mass Support of the Cs3u Feeder for the Iter

Design of the ITER TF Magnet Feeder Systems

Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR

Updating the design of the feeder components for the ITER magnet system

Conceptual Design and Coupled Neutronic/thermal-Hydraulic/mechanical Research of the Supercritical Water Cooled Ceramic Blanket for CFETR

ITER Magnet Feeder: Design, Manufacturing and Integration

Conceptual design and analysis of CFETR magnets

Evaluation and Optimization of Tritium Breeding, Shielding and Nuclear Heating Performances of the Helium Cooled Solid Breeder Blanket for CFETR

Status of Design and R&D for the ITER Feeder System Procurement in China

Mechanical Analysis for ITER Correction Coil Feeder

Updated Thermal-Mechanical Analysis of DFLL-TBM for ITER

Evolution of the Design of Cold Mass Support for the ITER Magnet Feeder System

Progress in Design, Analysis, and Manufacturing Studies of the Iter Feeders

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Preliminary Thermo-mechanical Analysis of Water Cooled Ceramic Breeder Blanket for China Fusion Engineering Test Reactor

Conceptual Design and Neutronics/Thermal-Hydraulic Coupling Optimization Analyses of Two Typical Helium Cooled Solid Breeder Blanket Modules for CFETR Phase II

Design and Analysis of Cooling Water System for ECRH and ICRF Testing Bench