Abstract:For both CO2 enhanced oil recovery and CO2 sequestration in oil reservoirs, the diffusion of injected CO2 into oil-saturated porous media is of great significance ill project design, risk assessments, economic evaluation, and performance forecast. However, the measurement of CO2 diffusion coefficient in liquid-saturated porous media under reservoir conditions has not been well-established due to the complications caused by density-induced natural convection in the CO2-oil systems. This paper presented a new method for measuring the effective CO2 diffusion coefficient in oil-saturated porous media under reservoir conditions. A core plug with the two end faces sealed was designed as the physical model for radial diffusion process. The measurement was conducted in a high-pressure diffusion cell with an oil-saturated core sample placed ill the middle and the remaining void space of the cell filled by high-pressure CO2 sample. A small-pressure decay technique was employed to record the pressure change of the gas phase during the diffusion measurement. Because the oil phase contained in the porous medium swells as CO2 diffuses into it, the experiment essentially involves both diffusion and swelling-induced convection. To describe these processes involved in the measurement, a mathematical model along with numerical solutions was derived. The effective diffusion coefficient was determined by matching the experimental pressure decay Curve with the corresponding mathematical model. The proposed method was demonstrated for oil-saturated Berea core samples at pressures ranging from 2.2 to 6.5 MPa. The measured pressure decay Curves showed good agreement with the mathematical predictions using the best-fitted effective diffusion coefficients. The derived method can be readily implemented in laboratories that can handle high-pressure fluids; thus, this study provides a tool for studying CO2 diffusion in oil-saturated porous rocks.

A rapid method for the measurement and estimation of CO2 diffusivity in liquid hydrocarbon-saturated porous media using MRI.

Measurement of gas diffusion coefficient in liquid-saturated porous media using magnetic resonance imaging

A Study on Co2 Diffusion Coefficient in N-Decane Saturated Porous Media by Mri

Experimental Measurement of Co2 Diffusion Coefficient in Porous Media Using Nmr Micro-Imaging

Diffusion of CO2 in Decane Studied by Magnetic Resonance Imaging

The studies of CO2 injected into porous media filled with water by MRI

CO2 diffusion in n-hexadecane investigated using magnetic resonance imaging and pressure decay measurements

Visualization and Measurement of CO2 Flooding in Porous Media Using MRI

In Situ Measurement of CO2-oil Mixture Phase Behavior Properties in Porous Media for CO2-enhanced Oil Recovery

Quantitative study of density-driven convection mass transfer in porous media by MRI

Experimental Study of Density-Driven Convection in Porous Media by Using MRI

Application of MRI to CO_2 displacement oil experiments

Study of the Fluid Flow Characteristics in a Porous Medium for CO2 Geological Storage Using MRI.

Measurement of Two Phase Flow in Porous Medium Using High-resolution Magnetic Resonance Imaging

Dynamic Measurements Of Co2 Flow In Water Saturated Porous Medium At Low Temperature Using Mri

MRI measurements of CO2 hydrate formation and dissociation in porous medium

Investigation of CO2 Diffusion in Oil-Saturated Porous Media by Using X-Ray Computer-Assisted Tomography

MRI Measurements of CO2–CH4 Hydrate Formation and Dissociation in Porous Media

Experimental Study of Carbon Dioxide Diffusion in Oil-Saturated Porous Media under Reservoir Conditions

MRI measurements of CO2 hydrate dissociation rate in a porous medium

Investigation on Flow Behaviour in Porous Media During Water Flooding and Following CO2 Flooding Using MRI