Abstract:With the transition to electric propulsion accelerating, lithium-ion batteries (LIBs) are essential due to their high energy density and efficiency. However, higher energy requirements and rapid charging pose significant safety and performance challenges, particularly for large cells. This research uniquely investigates the thermal and electrochemical responses of large-sized prismatic LiFePO4 cells under various cell thicknesses (ranging from 11.3mm to 90mm), charging conditions (ranging from 0.3C to 1C), and cooling strategies. The model reveals that higher charging rates markedly increase temperature and variability within the cells. Charging a 45mm-thick cell at a 1C rate and with natural air cooling results in a temperature rise of 24.3K and a deviation of 6.18K. In contrast, charging at 0.3C results in 5.4K and 1.17K, respectively. Despite the smaller heat exchange surface, bottom-cooling is most efficient for thick cells due to significant anisotropic heat conduction. Single-side cooling becomes more effective for thinner cells. A critical cell thickness for such transition exists at around 22.5mm. Double-side cooling consistently outperforms single-side cooling, significantly reducing temperature deviations across various cell thicknesses. Best cooling performance is seen in the case of the thinnest cell (11.3mm) with double-side cooling, with only 3K temperature rise and 1K deviation, at 1C charging. Additionally, improved thermal management during charging slightly increases heat generation of the cell, due to the higher resistance at lower temperatures, elevating ohmic heat generation from separators and electrodes. Polarization heat from the negative electrode is identified as the dominant heat source, driven by increased overpotential at higher temperatures due to elevated Li ion concentration at the electrode surface. The findings provide crucial insights into the thermal and electrochemical behaviors of large-sized LIBs, offering valuable guidance for the design and management of these LIB systems to enhance safety, performance, and longevity in electric vehicle applications, addressing a pressing need in the field.

Elucidating the rate limitation of lithium-ion batteries under different charging conditions through polarization analysis

Charging optimization in lithium-ion batteries based on temperature rise and charge time

Physicochemical nature of polarization components limiting the fast operation of Li-ion batteries

Electrochemical-Thermal Analysis of Large-sized Lithium-Ion Batteries: Influence of Cell Thickness and Cooling Strategy in Charging

Cathode Chemistries and Electrode Parameters Affecting the Fast Charging Performance of Li-Ion Batteries

Does Polarization Increase Lead to Capacity Fade?

Polarization Voltage Characterization of Lithium-Ion Batteries Based on a Lumped Diffusion Model and Joint Parameter Estimation Algorithm

Investigation of Lithium-Ion Battery Negative Pulsed Charging Strategy Using Non-Dominated Sorting Genetic Algorithm II

Identifying Cathode and Anode Polarizations During Practical High‐rate Charging/discharging in Different Li‐ion Pouch Batteries

Analysis of polarization and thermal characteristics in lithium-ion battery with various electrode thicknesses

Quantitative Analysis of Performance Decrease and Fast-Charging Limitation for Lithium-Ion Batteries at Low Temperature Based on the Electrochemical Model

The Polarization and Heat Generation Characteristics of Lithium-Ion Battery with Electric–Thermal Coupled Modeling

Effect of initial temperature on electrochemical and thermal characteristics of a lithium-ion battery during charging process

The Timescale Identification and Quantification of Complicated Kinetic Processes in Lithium-Ion Batteries Based on Micro-Reference Electrodes

Modeling the inhomogeneous lithium plating in lithium-ion batteries induced by non-uniform temperature distribution

Effect of temperature on the high-rate pulse charging of lithium-ion batteries

Effects of long-term fast charging on a layered cathode for lithium-ion batteries

Investigation on Lithium-Ion Battery Degradation Induced by Combined Effect of Current Rate and Operating Temperature During Fast Charging

Depolarization Effect to Enhance the Performance of Lithium Ions Batteries

The Dilemma of C-Rate and Cycle Life for Lithium-Ion Batteries under Low Temperature Fast Charging

(Digital Presentation) The Effects of Charging Rates on the Thermal Behavior of Lithium-Sulfur Batteries Via Comsol Simulation