Abstract:Radiofrequency ablation (RFA) has been widely used as an alternative treatment modality for liver tumors. Monitoring the temperature distribution in the tissue during RFA is required to assess the thermal dosage. Ultrasound temperature imaging based on the detection of echo time shifts has received the most attention in the past decade. The coefficient k, connecting the temperature change and the echo time shift, is a medium-dependent parameter used to describe the confounding effects of changes in the speed of sound and thermal expansion as temperature increases. The current algorithm of temperature estimate based on echo time shift detection typically uses a constant k, resulting in estimation errors when ablation temperatures are higher than 50°C. This study proposes an adaptive-k algorithm that enables the automatic adjustment of the coefficient k during ultrasound temperature monitoring of RFA. To verify the proposed algorithm, RFA experiments on in vitro porcine liver samples (total n = 15) were performed using ablation powers of 10, 15, and 20 W. During RFA, a clinical ultrasound system equipped with a 7.5-MHz linear transducer was used to collect backscattered signals for ultrasound temperature imaging using the constant- and adaptive-k algorithms. Concurrently, an infrared imaging system and thermocouples were used to measure surface temperature distribution of the sample and internal ablation temperatures for comparisons with ultrasound estimates. Experimental results demonstrated that the proposed adaptive-k method improved the performance in visualizing the temperature distribution. In particular, the estimation errors were also reduced even when the temperature of the tissue is higher than 50°C. The proposed adaptive-k ultrasound temperature imaging strategy has potential to serve as a thermal dosage evaluation tool for monitoring high-temperature RFA.

Simulation of Temperature Field for Temperature-Controlled Radio Frequency Ablation Using a Hyperbolic Bioheat Equation and Temperature-Varied Voltage Calibration: a Liver-Mimicking Phantom Study.

Finite Element Modeling of Temperature Distribution During Temperature-controlled Radiofrequency Ablation of Liver Tumor

Fourier and Non-Fourier Bio-Heat Transfer Models to Predict Ex Vivo Temperature Response to Focused Ultrasound Heating

Numerical Evaluation of Ablation Zone under Different Tip Temperatures During Radiofrequency Ablation

Thermal modelling for endocardiac radiofrequency ablation: comparison of hyperbolic bioheat equation and Pennes bioheat equation with finite element method

Fast Calculation of 3D Radiofrequency Ablation Zone Based on a Closed-Form Solution of Heat Conduction Equation Fitted by Ex Vivo Measurements.

A Computational Model for Simulation of Temperature During Radio-Frequency Ablation of Biological Tissue

Comparison of Two Techniques for Radiofrequency Hepatic Tumor Ablation through Numerical Simulation

A New Model for RF Ablation Planning in Clinic.

An Analytical Solution for Temperature Distributions in Hepatic Radiofrequency Ablation Incorporating the Heat-Sink Effect of Large Vessels.

RF ablation thermal simulation model

Evaluation of lesion characteristics and baseline impedance on high-power short-duration radiofrequency catheter ablation using computer simulation

Pennes' bioheat equation vs. porous media approach in computer modeling of radiofrequency tumor ablation

Electrothermal Analysis of Radiofrequency Tissue Ablation with Injectable Flexible Electrodes Considering Bio-Heat Transfer

RF Ablation Thermal Simulation Model: Parameter Sensitivity Analysis

Computer modelling of an impedance-controlled pulsing protocol for RF tumour ablation with a cooled electrode

Prediction of transient temperature fields and cumulative tissue destruction for radio frequency heating of a tumor

Recent Progress in modeling and simulation of Radio frequency Ablation

Adaptive Ultrasound Temperature Imaging for Monitoring Radiofrequency Ablation.

A Methodology for Constraining Power in Finite Element Modeling of Radiofrequency Ablation.

Real-Time Calculation Method for Temperature Distribution of Temperature-Controlled Radiofrequency Ablation