Effect of ferrite doped sludge-based catalysts on methane production in anaerobic digestion of organic solid waste
Jiehong Cheng,Renkai Ye,Jun Zhu,Yue Tang,Shouqiang Huang,Dongdong Ge,Zitao Geng
DOI: https://doi.org/10.1016/j.fuel.2024.131309
IF: 7.4
2024-04-15
Fuel
Abstract:In response to the world-wide call for carbon neutralization, efficiently producing biogas for energy from biomass through anaerobic digestion has become a hot research topic. In this study, ferrite doped sludge-based catalysts were prepared by pyrolysis and carbonization using iron chloride and sludge at different mass ratios of 1:3(FECC1), 2:3(FECC2), and 3:3(FECC3). These catalysts were added to the anaerobic digestion (AD) system to improve biogas production and anaerobic digestion efficiency. The TEM and XRD test results showed that compared with FECC1 and FECC2, the FECC3 nanoparticles had many smooth polyhedral Fe 3 O 4 grains with high crystallinity, and the size distribution was from 20 to 120 nm. The above catalysts were tested in batch anaerobic co-digestion of sludge and kitchen waste to investigate their effects on digestion performance. Compared with the other three groups, FECC3 group achieved the highest cumulative methane and biogas production after 30 days of AD. The specific methane production rate for FECC3 reached 133 mL/g VSS, which 32 % and 60 % higher than those in the FECC2 and FECC1 groups, and 135 % higher than those in the blank group, respectively. In addition, FECC3 showed obvious advantages in VSS removal rate, VFA yield enhancement, and Fe 2+ concentration increase in the mixture. The abundance of acid-producing bacteria and hydrogenotrophic methane bacteria of FECC3 group increased significantly, which indicated that FECC3 significantly affected microbial community. It could therefore be concluded that the FECC3 group was the best among the three catalysts groups in terms of gas production effect and AD performance.
energy & fuels,engineering, chemical