Abstract:Titanium nanotubes (TNT) is commonly synthesized from TiO2 P25 under hydrothermal reaction (HTR) using 10 M NaOH). Composite adsorbents derived from TiO2 and carbon spheres (CS) via a facile two-stage HTR process were investigated. CS was firstly synthesized from glucose through HTR. The mixture (CS, TiO2, and NaOH) was then transferred to a Teflon-lined autoclave for another HTC process to generate TNT/CS. The TNT/CS composite was calcined from 300 to 800 °C to evaluate the changes in its surface properties (functional group, morphology, and external charge), textural parameters, crystallinity, cation exchange capacity, and adsorption capacity. Results indicated that the Brunauer–Emmett–Teller surface area and total pore volume of composites were 25.0–131.9 m2/g and 0.099–0.33 cm3/g, respectively. The composites exhibited a negatively charged surface within pH 4.0–9.0, with their zeta potentials at pH 5.0 ranging from −54.60 to −31.1 mV. The result of X-ray photoelectron spectroscopy demonstrated that the main components (%atomic) in the composites were carbon (29.07 %–60.75 %), oxygen (29.09 %–49.16 %), titanium (2.93 %–17.52 %), and sodium (0.56 %–9.48 %). During the preparation of TNT/CS, CS (its negatively charged surface) can well absorb Na+ ions in the mixture. This phenomenon prevented the performance of tubular morphology from TNT/CS. The synthesized composites were regarded as multifunctional adsorbents for adsorbing various contaminants (Pb2+, Cd2+, Cu2+, cationic methylene blue dye, phenol, and toluene) in water. Equilibrium adsorption at pH 5.0 was carried out to estimate their adsorption capacities toward the selected contaminants. The Langmuir maximum adsorption capacities of Pb, Cd, Cu, phenol, methylene blue, and toluene were 534, 518, 514.2, 690, 329, 138 mg/g for TNT/CS and 334–523, 384–477, 297–453, 394–677, 303–416, 118–260 mg/g for the calcinated TNT/CS composites, and 26.3, 23.8, 21.4, 285, 239, 188 mg/g for commercial activated carbon, respectively. The adsorption mechanisms were elucidated based on the adsorption experiments and surface characteristics of TNT/CS. Ion exchange was the primary adsorption mechanism for the test cationic contaminants. The van der Waals force was an important adsorption mechanism for phenol and toluene. The developed TNT/CS composite can be employed as an effective adsorbent for adsorbing cationic and non-ionic contaminants from aqueous solutions.

[Simultaneous Removal of Cd (II) and Phenol by Titanium Dioxide-Titanate Nanotubes Composite Nanomaterial Synthesized Through Alkaline-Acid Hydrothermal Method].

Synergistic Adsorption of Cu(II) and Photocatalytic Degradation of Phenanthrene by a Jaboticaba-Like TiO2/titanate Nanotube Composite: an Experimental and Theoretical Study

In-situ route for the graphitized carbon/TiO<sub>2</sub> composite photocatalysts with enhanced removal efficiency to emerging phenolic pollutants

Photocatalytic Degradation of 2,4-Dichlorophenol by TiO2 Intercalated Talc Nanocomposite

Dual-Enhanced Photocatalytic Activity of Fe-Deposited Titanate Nanotubes Used for Simultaneous Removal of As(III) and As(V).

Adsorption characteristics of lead, copper, cadmium, methylene blue, phenol, and toluene in water using composite synthesized from titanium dioxides and carbon spheres through hydrothermal method

A New Type of Cobalt-Deposited Titanate Nanotubes for Enhanced Photocatalytic Degradation of Phenanthrene

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Cr(VI) and Cr(III) with TiO2 and Titanate Nanotubes

Phenol Degradation by TiO2 Photocatalysts Combined with Different Pulsed Discharge Systems.

Adsorption of Pb(II) and Cd(II) from aqueous solutions using titanate nanotubes prepared via hydrothermal method

Facile Synthesis of Nano-Tio2/stellerite Composite with Efficient Photocatalytic Degradation of Phenol

High Photocatalytic and Adsorptive Performance of Anatase-Covered Titanate Nanotubes Prepared by Wet Chemical Reaction

High-Capacity and Photoregenerable Composite Material for Efficient Adsorption and Degradation of Phenanthrene in Water.

A H2O2 Oxidation Approach to Ti3C2/TiO2 for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water.

Synthesis of α-Fe2O3/TiO2 nanotube arrays for photoelectro-Fenton degradation of phenol

Simultaneous adsorption of Cd2+ and photocatalytic degradation of tris-(2-chloroisopropyl) phosphate (TCPP) by mesoporous TiO2

Simultaneous Adsorption of Uranium(vi) and 2-Chlorophenol by Activated Carbon Fiber Supported/modified Titanate Nanotubes (tnts/acf): Effectiveness and Synergistic Effects

Simultaneous Removal of Cr(VI) and 4-Chlorophenol Through Photocatalysis by a Novel Anatase/titanate Nanosheet Composite: Synergetic Promotion Effect and Autosynchronous Doping.

Preparation of a Ti0.7W0.3O2/TiO2 Nanocomposite Interfacial Photocatalyst and Its Photocatalytic Degradation of Phenol Pollutants in Wastewater

Removal of Cd2+ from water containing Ca2+ and Mg2+ using titanate nanotubes modified by carbon