Abstract:Papermaking wastewater contained various of toxic and hazardous pollutants that pose significant threats to both the ecosystem and human health. Despite these risks, limited research has addressed the detoxification efficiency and mechanism involved in the typical process treatment of papermaking wastewater. In this study, the acute toxicity of papermaking wastewater after different treatment processes was assessed using luminousbacteria, zebrafish and Daphnia magna ( D. magna ). Meanwhile, the pollution parament of the corresponding wastewater were measured, and the transformation of organic pollutant in the wastewater was identified by three-dimensional fluorescence and other techniques. Finally, the possible mechanism of toxicity variation in different treatment processes were explored in combination with correlation analyses. The results showed that raw papermaking wastewater displayed high acute toxicity to luminousbacteria, and exhibited slight acute toxicity and acute toxicity effect to zebrafish and D. magna , respectively. After physical and biochemical processes, not only the toxicity of the wastewater to zebrafish and D. magna was completely eliminated, but also the inhibitory effect on luminousbacteria was significantly reduced (TU value decreased from 11.07 to 1.66). Among them, the order of detoxification efficiency on luminousbacteria was air flotation > hydrolysis acidification > IC > aerobic process. Correlation analyses revealed a direct link between the reduced of Total Organic Carbon (TOC) and Chemical Oxygen Demand (COD) and the detoxification efficiency of the different processes on the wastewater. In particular, the removal of benzene-containing aromatic pollutant correlated positively with decreased toxicity. However, the Fenton process, despite lowering TOC and COD, increased of the acute toxicity of the luminousbacteria (TU value increased from 1.66 to 2.33). This may result from the transformation generation of organic pollutant and oxidant residues during the Fenton process. Hence, oxidation technologies such as the Fenton process, as a deep treatment process, should be more concerned about the ecological risks that may be caused while focusing on their effectiveness in removing pollutant.

[Comprehensive Toxicity Evaluation and Toxicity Identification Used in Tannery and Textile Wastewaters].

Application of the Simplified Toxicity Identification Evaluation Procedures to a Chemical Works Effluent

[Toxicity Identification Evaluation on Efficiency of Chemical Effluent Treatment].

Application of toxicity identification evaluation procedures on wastewaters and sludge from a municipal sewage treatment works with industrial inputs.

Analysis of pollutant and toxicity of textile wastewater in treatment process

Application of Toxicity Identification Evaluation Procedures to an Effluent from a Nitrogenous Fertilizer Plant in China.

Use of TIE techniques to characterize industrial effluents in the Pearl River Delta region

Assessment of Combined Toxicity of Heavy Metals from Industrial Wastewaters on Photobacterium Phosphoreum T3S

Using a Battery of Bioassays to Assess the Toxicity of Wastewater Treatment Plant Effluents in Industrial Parks

Assessment of hormonal activities and genotoxicity of industrial effluents using in vitro bioassays combined with chemical analysis

USING SINGLE-SPECIES TOXICITY TESTS, COMMUNITY-LEVEL RESPONSES, AND TOXICITY IDENTIFICATION EVALUATIONS TO INVESTIGATE EFFLUENT IMPACTS

A Case Study on Identifying the Toxicant in Effluent Discharged from a Chemical Plant

Analysis on the degradation of organic pollutants in textile wastewater treatment process by GC-MS

Toxicity reduction in an industrial nitro-aromatic wastewater plant: an assessment and a proposed improvement.

Identifying influential priority of factors governing the acute biological toxicity of two kinds of industrial wastewaters

A STUDY ON POLLUTION CHARACTERISTICS AND REMOVAL PERFORMANCE OF HEAVY METALS IN A TANNERY AND TEXTILE DYEING INDUSTRIAL PARK WASTEWATER TREATMENT PLANT

Long-term and High-Bioavailable Potentially Toxic Elements (ptes) Strongly Influence the Microbiota in Electroplating Sites.

Evaluation and Management Methods for Toxicity Control of Industrial Wastewater

Toxicity evaluation of wastewater collected at different treatment stages from a pharmaceutical industrial park wastewater treatment plant.

Toxicity of Printing-Dyeing Wastewater to Aquatic Organisms

New insights into toxicity reduction and pollutants removal during typical treatment of papermaking wastewater