Abstract:Bifunctional initiators with two labile groups ( e g peroxides or azo groups) are frequently used in the polymer industry for the synthesis of vinyl polymers and resin curing In general, there are two types of bifunctional initiators: one is symmetrical bifunctional initiators containing two labile groups of equal structure, the other is unsymmetrical bifunctional initiators containing two labile groups of unequal structure One of the potential advantages of using bifunctional initiators is that high polymer molecular mass and high polymerization rate can be obtained simultaneously by controlling the initiator decomposition rate through optimal reaction temperature programming For free radical polymerization of methyl methacrylate (MMA) with monofunctional initiators, the kinetics is reasonably well understood in both low and high monomer conversion regimes However, the presence of an additional labile group in bifunctional initiators makes the polymerization kinetics very complicated. This is because labile groups such as peroxides become redistributed repeatedly in the growing and inactive polymers and they are engaged in further initiation, propagation, chain transfer and termination reactions during the course of polymerization. The effects of temperature and initiator concentration on the kinetics of MMA bulk polymerization initiated by 2,5 dimethyl 2,5 bis(2 ethyl hexanoyl peroxide) hexane (TX 141) were investigated.The energy of activation of MMA bulk polymerization initiated by TX 141 was about 91 kJ·mol -1 , and that of TX 141 decomposition was about 140 kJ·mol -1 , which was more close to the experimental data.The reaction order of TX 141 concentration was about 0 72,because there was mono and bi molecule termination. The kinetic comparison initiated by TX 141 and benzoyl peroxide (BPO) with the same half life period showed that the kinetics was the same when the concentration of TX 141 was half of that of BPO.But, the number average molecular mass ratio of that initiated by TX 141 to that by BPO was from 1 2 to 1 33 increasing with the conversion.There was an exothermal peak in the DSC curve of polymer initiated by TX 141 at low conversion, but there was no peak at high conversion and no peak was observed for the polymer initiated by BPO.It was shown that the two functional groups of bifunctional initiator decomposed at different times during the polymerization process.

Oxygen-Initiated Free-Radical Polymerization of Alkyl Acrylates at High Temperatures

Alkyl Halide/tertiary Amine As Novel Initiators for Free Radical Polymerizations of Methyl Methacrylate, Methyl Acrylate and Styrene

Aerobic-Controlled Radical Polymerization: Full Oxygen Tolerance Enabled by Air-Stable Amine–Borane

Controlled Radical Polymerization: from Oxygen Inhibition and Tolerance to Oxygen Initiation

Oxygen-Initiated and Regulated Controlled Radical Polymerization under Ambient Conditions

Presence of Two Maxima in the Isothermal Free-Radical Polymerization Rate of Isobornyl Methacrylate Retarded by Oxygen

Bubble-Free Frontal Polymerization of Acrylates via Redox-Initiated Free Radical Polymerization

A highly efficient oxygen tolerant visible-light mediated RAFT polymerization

Benzoyl Peroxide- and Azobisisobutyronitrile-Initiated Polymerization of Acrylic Acid and Methyl Acrylate in the Temperature Range Close to Room Temperature

Aerobic mechanochemical reversible-deactivation radical polymerization

Reverse Atom-Transfer Radical Polymerization at Room Temperature

Kinetics of methyl methacrylate polymerization initiated by bifunctional initiator

Interfacial and ion-pairing catalysis for oxygen-tolerant large-scale ATRP in ab initio emulsion

Dispersion Atom Transfer Radical Polymerization of Vinyl Monomers in Supercritical Carbon Dioxide

Reverse Atom Transfer Radical Polymerization Of Methyl Acrylate Using Aibn As The Initiator Under Heterogeneous Conditions

Study on Kinetics of Controlled/living Radical Polymerization of Acrylonitrile by RAFT Technique

Free Radical Polymerization of Butyl Acrylate in Monodispersed Droplets: Comparison Between Two Heating Strategies

Graduation Initiating Radical Polymerization (I) - Synthesis of Hyper-high Molecular Weight Polymers by Free Radical Sources

Allylthioketone Mediated Free Radical Polymerization of Methacrylates

Mechanistic insights into the incorporation of higher alpha-olefins into acrylate copolymers via photoATRP

Nitroxide-controlled Free Radical Copolymerization of Styrene and Acrylonitrile Monitored by Electron Spin Resonance and Fourier Transform Infrared Technique in Situ