Abstract:Acoustic emission (AE) and particle flow code (PFC 3D ) are utilized to characterize microcracking nature in mode-I fracture of coal with strong bursting liability. The microcracks are represented by AE moment tensor (MT), which corresponds to displacement discontinuities involving opening/closing and sliding motions. The microcracking source parameters, including shear/tensile type, volume, orientation, motion, and magnitude, are calculated by minimizing the errors between the analytical and measured displacements, with an imposed constraint. Then, the detailed fracture processes, including microcracking source mechanisms and energy dissipation during coal tensile failure, are analyzed using both experimental and numerical approaches. The results show that the time-varying of crack mode angle and decomposed crack volume suggest a mixed-mode mechanisms locally with both normal and tangential displacements for microcracks. However, the orientations of microcracks with bigger magnitude are almost parallel to the direction of the crack propagation path, and their movement directions are mainly along the direction of the maximum principal stress, which is compatible with the expected fracture mechanism of mode-I opening globally. The dissipated energy and crack opening displacement obtained from AE inversion are approximately consistent with results calculated from energy release rate G and opening displacement measured using DIC, respectively. A new AE MT simulation method, based on particle motion, is developed using PFC 3D to verify the reliability of the above-mentioned microcracking characterization results. The mechanical properties as well as AE responses (including AE rate, magnitude distribution, spatial location, and MT) from PFC 3D numerical simulation are in good agreement with the experimental results, which reinforces the reliability the microcracking characterization results from AE inversion and simulation. Due to the tortuous crack propagation path and the inhomogeneity between grains, the maximum principal stress and resultant displacement coexists both on the normal and tangential of the inclined crack surface. Under the combined action of tensile and shear stress, the normal and tangential motion displacement components along the crack plane are generated, respectively, resulting in mixed-mode microcrack. This research provides a new approach for characterizing the microcracks in loaded rock/coal, which can deepen the understanding of meso-process and mechanism during rock/coal fracture.

Crack propagation in fine grained graphites under mode I and mixed-mode loading, as observed in situ by microtomography

An Evaluation on Fatigue Crack Growth in a Fine-Grained Isotropic Graphite

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

Analysis of Crack Propagation in Nuclear Graphite Using Three-Point Bending of Sandwiched Specimens

Predicting and visualizing crack propagation in nuclear graphite

Intragranular and Intergranular Crack Propagation in Nanocrystalline Ni Under Single-Cycle Mode I Loading

An investigation of fracture behaviors of NBG-18 nuclear graphite using in situ mechanical testing coupled with micro-CT

Experimental Study of Dynamic Crack Growth in Unidirectional Graphite/Epoxy Composites using Digital Image Correlation Method and High-speed Photography

Combined evaluation of Young modulus and fracture toughness in small specimens of fine grained nuclear graphite using 3D image analysis

Nanofracture of Graphyne Family with Geometrical Distortions of Crack Fronts

Crack propagation mechanism in rock-like specimens containing intermittent flaws under shear loading

Micro-crack Tip Fracture of Commercial Grade Aluminum under Mixed Mode Loading

Crack Propagation Behavior of Single‐Crystal Titanium Under Cyclic Loading: A Molecular Dynamics Study

Initial and unstable fracture toughness of quartz-diorite rock under mixed mode I/II loading: Experimental and numerical investigation

Microcracking Characterization in Tensile Failure of Hard Coal: An Experimental and Numerical Approach

Comparative Study on Modes I and II Fracture Characteristics of Bituminous Coal Using Asymmetric Semi-Circular Bend Specimen

Dynamic propagation behaviors of pure mode I crack under stress wave loading by caustics

Simulation of crack propagation behavior of nuclear graphite by using XFEM, VCCT and CZM methods

Mixed-mode Fracture Behaviors of AISI 1045 and AISI 5140 Steels in Compressor Crankshafts – Part I: Mode I-III

The Effect of T-stress on the Crack Growth and Propagation of Specimen Subjected I-II Mixed Mode

Static and Dynamic Fracture Toughness of Graphite Materials with Varying Grain Sizes