Abstract:A simple method for the preparation of a three-dimensional (3D) reduced graphene oxide/Fe3O4 (3D-rGO/Fe3O4) hybrid hydrogel was developed via the reduction of graphene oxide by ferrous ions and in situ simultaneous generation of tunable Fe3O4 nanoparticles on graphene sheets. After drying at 50 degrees C for 1 h, its mechanical strength was enhanced according to elastic modulus analysis. The hydrophilic and strength-enhanced hybrid was suitable for the removal of two typical pharmaceuticals including ciprofloxacin (CIP) and tetracycline (TC). Their adsorption kinetics, isotherms, pH and cation effects on 3D-rGO/Fe3O4 were studied. The adsorption capacities of 3D-rGO/Fe3O4 were 2.78 mmol g(-1) for CIP and 4.76 mmol g(-1) for TC according to the Langmuir fitting results, which are much higher than those of commercial granular activated carbons and other graphene-based hydrogels. Moreover, the spent 3D-rGO/Fe3O4 can be easily regenerated by Fenton-like catalytic oxidation with little loss of adsorption capacity after ten adsorption-oxidation cycles. The textural structure and surface functional groups on the adsorbent were hardly changed during the oxidative regeneration process. Benefiting from its superiority, both enhanced adsorption and catalytic degradation of pharmaceuticals were simultaneously achieved using this novel hybrid hydrogel, making it competitive in the removal of micropollutants from water or wastewater. Environmental significance A hydrophilic and strengthened 3D reduced graphene oxide/nano-Fe3O4 hybrid hydrogel was successfully prepared and it exhibited enhanced adsorption and catalytic oxidation of typical pharmaceuticals in water. This study provided a new strategy for the preparation of a graphene oxide-based granular adsorbent with high adsorption of micropollutants in water, and in particular, the loaded nano-Fe3O4 nanoparticles may catalytically oxidize the adsorbed pollutants in the regeneration process, achieving a combination of enhanced adsorption and in situ catalytic degradation of micropollutants on the hybrid adsorbent. This 3D-rGO/Fe3O4 adsorbent shows promising application for the removal of micropollutants from water or wastewater.

Electrospun graphene oxide/MIL-101(Fe)/poly(acrylonitrile-co-maleic acid) nanofiber: A high-efficient and reusable integrated photocatalytic adsorbents for removal of dye pollutant from water samples

Ce-UiO-66-F4-based Composites Decorated with Green Carbon Dots for Universal Adsorption of Organic Pollutants Containing Hydrogen Bond Donors and Its Application Exploration

Sustainable and reusable electrospun g-C3N5/MIL-101(Fe)/poly(acrylonitrile-co-maleic acid) nanofibers for photocatalytic degradation of emerging pharmaceutical pollutants

Highly Efficient Dye Adsorption and Removal: a Functional Hybrid of Reduced Graphene Oxide–fe3o4 Nanoparticles As an Easily Regenerative Adsorbent

Alternating spin-and-spray electrospun scaffold membranes with fractionated MIL-101(Cr) adsorbent for high-performance single-pass dye adsorption process

Bi2O3/Bi2O2.33@ECNF: A recyclable material for efficient adsorption and photocatalytic degradation of organic contaminants

Fabrication of Α‐fe2o3@rgo/pan Nanofiber Composite Membrane for Photocatalytic Degradation of Organic Dyes

Preparation of TPPZn/Ag3PO4 Electrospun Fiber Material and Removal of Organic Dyes

Hydrophilic and strengthened 3D reduced graphene oxide/nano-Fe3O4 hybrid hydrogel for enhanced adsorption and catalytic oxidation of typical pharmaceuticals

In Situ Electrospun Porous MIL-88A/PAN Nanofibrous Membranes for Efficient Removal of Organic Dyes

Aminated Graphene Oxide Impregnated with Photocatalytic Polyoxometalate for Efficient Adsorption of Dye Pollutants and Its Facile and Complete Photoregeneration

Dual-functional polyethersulfone composite nanofibrous membranes with synergistic adsorption and photocatalytic degradation for organic dyes

Activated carbon-hybridized and amine-modified polyacrylonitrile nanofibers toward ultrahigh and recyclable metal ion and dye adsorption from wastewater

Photodegradation of Organic Pollutants Via Carbon Nitride/Graphene-Oxide Nanocomposite Loaded on Polyacrylic Acid Hydrogel with Free Separation

Hypercrosslinked porous polymers hybridized with graphene oxide for water treatment: dye adsorption and degradation

Removal of Organic Pollutants with Polylactic Acid-Based Nanofiber Composites

Developing Stretchable and Graphene-Oxide-based Hydrogel for the Removal of Organic Pollutants and Metal Ions

Direct Electrospinned La2O3 Nanowires Decorated with Metal Particles: Novel 1 D Adsorbents for Rapid Removal of Dyes in Wastewater

Polyaniline/reduced graphene oxide doping induced abundant active sites in enset fiber as an efficient adsorbent material for wastewater treatment

Ultrafine Palladium Nanoparticle-Bonded to Polyetheylenimine Grafted Reduced Graphene Oxide Nanosheets: Highly Active and Recyclable Catalyst for Degradation of Dyes and Pigments

Preparation of TiO2/Ag/GO/Nylon 6,6 nanofiber membrane by a novel electrospinning method and its photodegradation efficiency under visible light