Abstract:Efficient heat transfer in PHEs relies on optimizing flow distribution to minimize thermal dead zones. Existing studies have predominantly focused on single-phase fluids as working media and employed density-based methods for structural optimization of microchannel heat exchangers at small scales. In this study, the Brinkman term from the porous media flow model is introduced in an innovative manner, along with the utilization of a material density interpolation model, which builds upon the density-based approach. A novel two-phase fluid topology optimization method is proposed, specifically tailored for large-scale PHE operating conditions, resulting in the successful design of a new PHE topology. To compare the performance of the two heat exchangers, finite element simulation, visualization experiments, and thermodynamic performance testing are conducted. The simulation results reveal that the heat transfer capacity of the topological PHE is 810 W with pressure drops of 18.8 kPa, while the dimple PHE exhibits heat transfer capacity of 652 W with pressure drops of 25.9 kPa. Compared to the dimple PHE, the topological PHE demonstrates 24.2 % improvement in heat transfer performance and 27.8 % reduction in pressure drop. The dimensionless comprehensive heat transfer coefficient (j/f) indicates that the overall performance of the topological PHE significantly surpasses that of the traditional PHE. Furthermore, the visualization experiment results demonstrate that the complex texture structure of the topological PHE effectively induces fluid motion, compelling the fluid to flow along the texture direction. This significantly mitigates the issue of uneven flow within the PHE, thus enhancing heat transfer efficiency. Specifically, the topological PHE exhibits inlet-outlet temperature difference of 10.3 degrees C and pressure drops of 11.2 kPa, while the dimple PHE shows inlet-outlet temperature difference of 6 degrees C and pressure drops of 12.9 kPa. The findings of this study provide guidance for future research endeavors aimed at evaluating potential solutions to advance heat transfer in PHEs and facilitate the implementation of thermal management strategies.

Numerical Simulation on Enhanced Heat Transfer and Flow Characteristics in Direct-Contact Heat Exchanger: A Novel Kenics Static Mixer

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Numerical Simulation of Single-phase Flow and Heat Transfer in Dimple Plate Heat Exchanger

Numerical and Experimental Investigation of Flow and Heat Transfer in Heat Exchanger Channels with Different Dimples Geometries

Numerical Investigation into Thermo-Hydraulic Characteristics and Mixing Performance of Triply Periodic Minimal Surface-Structured Heat Exchangers

Numerical Simulation and Thermodynamic Test Analysis of Plate Heat Exchanger Based on Topology Optimization

Study of Compound Heat Transfer Enhancement of Horizontal Liquid-Solid Fluidized Bed Heat Exchanger with A Kenics Static Mixer

Numerical Simulation and Sensitivity Analysis of Heat Transfer Enhancement in a Flat Heat Exchanger Tube with Discrete Inclined Ribs

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

3D Numerical Study of Conical and Fusiform Turbulators for Heat Transfer Improvement in a Double-Pipe Heat Exchanger

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

Two-phase simulation of entropy generation and thermo-hydraulic behavior of a therminol/CuO-diamond nanofluid in a heat exchanger

Numerical Prediction and Analysis of the Dynamic Behavior of Heat Exchangers with Continuous Helical Shaped Baffles

An Experimental and Numerical Investigation of Flow Patterns in the Entrance of Plate-Fin Heat Exchanger

Analysis and optimization of heat transfer performance of multi-stage tower-type direct contact heat exchangers in waste heat recovery

Study of Two-Phase Flow Distribution in Microchannel Heat Exchanger Header - A Numerical Simulation

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

Numerical and Visual Performance Investigation of a Plate Heat Exchanger Designed by Topological Optimization

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities