Abstract:In organic Rankine cycle (ORC) system, the selection of the structure and the optimization of operating parameters are usually studied separately, which makes the existing design principles inadequate to describe the impacts of the structure on ORC performance, and thus greatly limits its practical applications. To this end, this paper addresses an automated scheme for the optimal configuration of the ORC system, aiming to simultaneously determine the working fluid, the structure and the operating parameters corresponding to the maximal system efficiency. In this work, a comprehensive simulation and optimization of four common ORC structures is first conducted with 18 working fluid candidates and the most common heat sources with the inlet temperature ranging at 200-120 degrees C. The influence mechanisms of the ORC structure on the thermodynamic performance of the ORC system are then explored to generalize the qualitative and quantitative principles for ORC configuration. Results show that, for the single-pressure evaporation ORC (SPC) with a given inlet temperature of the heat source, the Pinch point type formed by the working fluid and the heat source changes from vaporization Pinch point (VPP) to VPP&PPP (preheat Pinch point) and then to PPP as the critical temperature of the working fluid decreases. The system efficiency of SPC reaches its maximum when the double Pinch point of VPP and PPP is formed and double-pressure evaporation ORC (DPC) reaches its maximum system efficiency when the double Pinch points of HVPP and LVPP are formed. Besides, it is found that when compared with the basic ORC, the regenerative ORC enables to improve the thermal efficiency and system efficiency of the system at the same time, whereas the bleeding regenerative ORC increases the thermal efficiency while reduces the system efficiency. For the DPC, the type of Pinch point formed by the heat source and the working fluid in the optimal working condition is the key to determine whether a system has multiple evaporation potential. Specially, for the heat source with variable inlet temperature, a linear relationship between the inlet temperature of the heat source and the critical temperature of the working fluid can be established to determine the multiple evaporation potential of a certain working fluid. Based on these results, an automatic scheme for ORC configuration is developed and expected to provide an effective guidance for the selection of working fluid, configuration optimization and parameter determination of the actual ORC heat recovery process.

Superstructure-based mixed-integer nonlinear programming framework for hybrid heat sources driven organic Rankine cycle optimization

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Integrated Operation Design and Control of Organic Rankine Cycle Systems with Disturbances

Cooperative Optimization of System Parameters and Heat Exchanger Structure for Geothermal Organic Rankine Cycle

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Thermo-economic assessment and multi-objective optimization of organic Rankine cycle driven by solar energy and waste heat

Synthesis and simultaneous optimization of multi-heat source multi-pressure evaporation organic Rankine cycle with mixed working fluid

A Synergistic Multi-Objective Optimization Mixed Nonlinear Dynamic Modeling Approach for Organic Rankine Cycle (ORC) under Driving Cycle

Simultaneous design and off-design operation optimization of a waste heat-driven organic Rankine cycle using a multi-period mathematical programming method

Process Integration and Superstructure Optimization of Organic Rankine Cycles (orcs) with Heat Exchanger Network Synthesis

Integrating Machine Learning and Mathematical Programming for Efficient Optimization of Operating Conditions in Organic Rankine Cycle (ORC) Based Combined Systems

Automated Configuration of Organic Rankine Cycle System Based on Process Simulations

Intelligent Collaborative Attainment of Structure Configuration and Fluid Selection for the Organic Rankine Cycle

Multi-objective optimization and fluid selection of organic Rankine cycle (ORC) system based on economic-environmental-sustainable analysis

Innovative Arrangements of Multiple Organic Rankine Cycles to Effectively Generate Power from the Medium-to-low Grade of Heat Source

Thermo-economic design, optimization, and evaluation of a novel zeotropic ORC with mixture composition adjustment during operation

The Energy Flow Method for Modeling and Optimization of Organic Rankine Cycle (ORC) Systems

Dynamic Response Assessment and Multi-Objective Optimization of Organic Rankine Cycle (ORC) under Vehicle Driving Cycle Conditions

Thermodynamic and Economic Optimization of a Double-Pressure Organic Rankine Cycle Driven by Low-Temperature Heat Source