Abstract:Water electrolyzers, such as proton exchange membrane water electrolyzers (PEM) and anion exchange membrane water electrolyzers (AEM) are important technologies for sustainable electrochemical energy conversion. The oxygen evolution reaction (OER) at the anode is a pivotal half-reaction in these systems. Despite substantial progress over the years, OER kinetics remain a major source of inefficiency in these devices, necessitating the development of stable catalysts. Currently, precious metal-based catalysts dominate the landscape of OER catalysts for these devices. As non-precious alternatives, nickel-iron (Ni/Fe) catalysts have emerged as particularly promising in alkaline conditions. However, they exhibit dynamic behavior during electrocatalysis—for instance, oxidizing to an active oxyhydroxide phase during the OER. This dynamic nature makes it challenging to establish clear structure-activity-stability relationships. Incorporating cobalt (Co) into the catalyst composition has been found to influence the activity and material conversion of mixed Ni-Fe-Co oxides and (oxy)hydroxides. Methods for rationally activating and stabilizing Ni-Fe-based catalysts via electrochemical and chemical (e.g. composition) routes are necessary for enhancing scalability and accessibility in hydrogen production devices. Herein, our goal is to understand and exploit activation protocols to enhance the OER performance of as-synthesized nickel-iron-cobalt metal thin films, addressing three primary objectives: synthesizing and characterizing homogeneous metal catalysts, investigating the impact of different potential ranges and scan rates on catalyst oxidation and surface conversion from the metal, and assessing how the addition of cobalt influences conversion rates and current density of the catalyst. We use cyclic voltammetry to facilitate and disentangle conversion (integrated reductive peak for Ni and/or Co 2+ → 3+ transition) and OER performance (current density (mA cm -2 ) at η = 350 mV). For all compositions tested of (Ni 80 Fe 20 ) 100-x Co x , x = 0 - 5 % we observe that the most effective conversion requires both redox and oxygen evolution. To further investigate the relationship between conversion and performance catalysts were tested in varying electrolytes such as 1M KOH, 0.1M KOH, and an ionomer overlayer to understand how these impacted conversion. Subsequently, post-analysis techniques such as X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma mass spectrometry optical emission spectroscopy (ICP-OES) were conducted to gain insights into the surface composition and elemental distribution of the catalysts following potential cycling. Additionally, electrochemical mass spectrometry (EC-MS) was employed to quantify the faradaic efficiency of oxygen, providing an understanding of at what point the catalyst begins converting and how much of the OER current is directed towards OER versus metal conversion. This project advances the fundamental understanding of NiFeCo catalyst conversion, shedding light on the critical role of catalyst composition and investigating the conditions that foster optimal conversion efficiency. The use of physical vapor deposition for thin film catalysts offers distinct advantages, making deposition and scaling processes facile. This capability, coupled with the gained insights into conversion dynamics, sets the stage for in situ optimization of the surface to achieve the active oxyhydroxide phase with the highest performance for AEM water electrolysis.

Co-Ni co-sputter deposited bimetallic thin film catalysts for alkaline hydrogen and oxygen evolution reactions

Co-modified Ni/N-doped Carbon As Electrocatalysts for HER and OER

Nickel Oxide/nickel Nanohybrids for Oxygen and Hydrogen Evolution in Alkaline Media

Co–Ni‐Based Nanotubes/Nanosheets As Efficient Water Splitting Electrocatalysts

Ni3N-Coated Ni Nanorod Arrays for Hydrogen and Oxygen Evolution in Electrochemical Water Splitting

Rational construction of uniform CoS/NiFe2O4 heterostructure as efficient bifunctional electrocatalysts for hydrogen evolution and oxygen evolution reactions

Ni 3 N-Coated Ni Nanorod Arrays for Hydrogen and Oxygen Evolution in Electrochemical Water Splitting

Controlled Electrodeposition Synthesis Of Co-Ni-P Film As A Flexible And Inexpensive Electrode For Efficient Overall Water Splitting

Efficient medium entropy alloy thin films as bifunctional electrodes for electrocatalytic water splitting

MOFs-derived N doped CoNi@C as Bifunctional Catalysts for Efficient Water Splitting

One-step Electrodeposition of Ni–Co–S Nanosheets Film As a Bifunctional Electrocatalyst for Efficient Water Splitting

Chemical Coprecipitation-Thermal Synthesis of Nano-Ni-Co Alloy for Efficient Hydrogen and Oxygen Evolution Reactions

Three-dimensional Well-Mixed / Highly-Densed NiS-CoS Nanorod Arrays: an Efficient and Stable Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution Reactions

Nickel-based thin film on multiwalled carbon nanotubes as an efficient bifunctional electrocatalyst for water splitting.

Composition-Dependent Dynamics of Nickel-Iron-Cobalt Metal Catalysts for Oxygen Evolution Reaction

In Situ Activated Co 3– x Ni x O 4 as a Highly Active and Ultrastable Electrocatalyst for Hydrogen Generation

Promotion of Overall Water Splitting Activity Over a Wide pH Range by Interfacial Electrical Effects of Metallic NiCo-nitrides Nanoparticle/NiCo2O4 Nanoflake/graphite Fibers.

Nickel-cobalt bimetallic sulfide NiCo(2)S(4)nanostructures for a robust hydrogen evolution reaction in acidic media

In-situ activation of three-dimensional porous NiFe alloy: Synergistic NiFe hydroxide/alloy as composite active sites for efficiently catalyzing alkaline water splitting

Cu- and Fe-Codoped Ni Porous Networks As an Active Electrocatalyst for Hydrogen Evolution in Alkaline Medium.

Facile deposition of FeNi/Ni hybrid nanoflower electrocatalysts for effective and sustained water oxidation