Abstract:Purpose: Brain–computer interface (BCI)-controlled assistive robotic systems have been developed with increasing success with the aim to rehabilitation of patients after brain injury to increase independence and quality of life. While such systems may use surgically implanted invasive sensors, non-invasive alternatives can be better suited due to the ease of use, reduced cost, improvements in accuracy and reliability with the advancement of the technology and practicality of use. The consumer-grade BCI devices are often capable of integrating multiple types of signals, including Electroencephalogram (EEG) and Electromyogram (EMG) signals.Materials and Methods: This paper summarizes the development of a portable and cost-efficient BCI-controlled assistive technology using a non-invasive BCI headset "OpenBCI" and an open source robotic arm, U-Arm, to accomplish tasks related to rehabilitation, such as access to resources, adaptability or home use. The resulting system used a combination of EEG and EMG sensor readings to control the arm. To avoid risks of injury while the device is being used in clinical settings, appropriate measures were incorporated into the software control of the arm. A short survey was used following the system usability scale (SUS), to measure the usability of the technology to be trialed in clinical settings.Results: From the experimental results, it was found that EMG is a very reliable method for assistive technology control, provided that the user specific EMG calibration is done. With the EEG, even though the results were promising, due to insufficient detection of the signal, the controller was not adequate to be used within a neurorehabilitation environment. The survey indicated that the usability of the system is not a barrier for moving the system into clinical trials.For the rehabilitation of patients suffering from neurological disabilities (particularly those suffering from varying degrees of paralysis), it is necessary to develop technology that bypasses the limitations of their condition. For example, if a patient is unable to walk due to the unresponsiveness in their motor neurons, technology can be developed that used an alternate input to move an exoskeleton, which enables the patient to walk again with the assistance of the exoskeleton.This research focuses on neuro-rehabilitation within the framework of the NHS at the Kent and Canterbury Hospital in UK. The hospital currently does not have any system in place for self-driven rehabilitation and instead relies on traditional rehabilitation methods through assistance from physicians and exercise regimens to maintain muscle movement.This paper summarises the development of a portable and cost-efficient BCI controlled assistive technology using a non-invasive BCI headset "OpenBCI" and an open source robotic arm, U-Arm, to accomplish tasks related to rehabilitation, such as access to resources, adaptability or home use. The resulting system used a combination of EEG and EMG sensor readings to control the arm, which could perform a number of different tasks such as picking/placing objects or assist users in eating.

Implementation of a Brain-Computer Interface for Robotic Arm Control

Neurofeedback-Driven 6-DOF Robotic Arm: Integration of Brain-Computer Interface with Arduino for Advanced Control

Continuous Hybrid BCI Control for Robotic Arm Using Noninvasive Electroencephalogram, Computer Vision, and Eye Tracking

Noninvasive Electroencephalogram Based Control of a Robotic Arm for Reach and Grasp Tasks

Control of a 2-DoF robotic arm using a P300-based brain-computer interface

Brain Computer Interface Based on Motor Imagery for Mechanical Arm Grasp Control

A brain-actuated robotic arm system using non-invasive hybrid brain–computer interface and shared control strategy

Noninvasive Brain-computer Interface Based High-level Control of a Robotic Arm for Pick and Place Tasks

A shared robot control system combining augmented reality and motor imagery brain-computer interfaces with eye tracking

Design and Implementation of Brain Computer Interface Based Robot Motion Control

Real-time Decoding Algorithm in Brain Machine Interfaces

A P300 Based Online Brain-Computer Interface System for Virtual Hand Control

Brain-Actuated Wireless Mobile Robot Control Through an Adaptive Human–Machine Interface

BCI controlled robotic arm as assistance to the rehabilitation of neurologically disabled patients

Cross-Platform Implementation of an SSVEP-Based BCI for the Control of a 6-DOF Robotic Arm

Introduction of brain computer interface to neurologists

Optimizing Motor Imagery Parameters for Robotic Arm Control by Brain-Computer Interface

Combination of Augmented Reality Based Brain- Computer Interface and Computer Vision for High-Level Control of a Robotic Arm.

Control of The Robotic Arm System With an SSVEP-Based BCI

Brain Computer Interface for Gesture Control of a Social Robot: an Offline Study

Decoding hand movements from human EEG to control a robotic arm in a simulation environment