Abstract:A facile and controllable method is developed to encapsulate phase change material (PCM) with biocompatible and non-toxic calcium alginate as the shell material. The PCM capsules are successfully prepared by using a simple co-extrusion minifluidic device with melted paraffin wax Rubitherm RT27 as the inner fluid and sodium alginate solution as the outer fluid, and the capsules are collected in a container with CaCl2 solution. In the whole preparation process, all the chemicals used to form the capsule shells are biocompatible and non-toxic. The prepared PCM capsules are featured with spherical shapes, highly monodisperse sizes and perfect core–shell microstructures. The capsule diameter and the RT27 content in the capsules as well as the resultant thermo-regulating capacity of the PCM capsules can be precisely controlled by simply adjusting the inner and outer flow rates. The results show that it is more effective to adjust the capsule diameter as well as the RT27 content inside PCM capsules by varying the inner flow rate rather than the outer flow rate. With increasing the inner flow rate but fixed outer flow rate, the diameters of both wet and dried capsules as well as the RT27 content inside the PCM capsule increase linearly. With increasing the outer flow rate but fixed inner flow rate, the average diameter of wet capsules slightly increases linearly but that of dried capsules nearly does not change, while the RT27 content inside the PCM capsule slightly decreases gradually. The proposed method for the encapsulation of PCMs is mild, simple, controllable, and easy to be scaled up. The prepared PCM capsules exhibit good thermo-regulating ability as well as satisfactory stability and reproducibility, and are highly attractive for various thermo-regulating, energy-storing and energy-saving applications.

A facile approach for phase change material encapsulation into polymeric flexible fibers using microfluidic principles

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Polyvinylidene fluoride supported phase change material fibers fabricated via emulsion jet injection method

Nano-encapsulated PCM Via Pickering Emulsification.

Microencapsulated Phase Change Materials and Its Application in Thermal-Regulated Fibers

Flexible Phase Change Material Fiber: A Simple Route to Thermal Energy Control Textiles

Phase Change Materials Meet Microfluidic Encapsulation

Microencapsulated phase change material through cellulose nanofibrils stabilized Pickering emulsion templating

Polysaccharide Assisted Microencapsulation for Volatile Phase Change Materials with a Fluorescent Retention Indicator

Confined Crystallization Polyether-Based Flexible Phase Change Film for Thermal Management

Microfluidic Fabrication of Compound Microfibers Encapsulating Nano-Enhanced Phase Change Material (PCM) for Thermal Regulation

Microfluidic method–based encapsulated phase change materials: Fundamentals, progress, and prospects

A Facile and Controllable Method to Encapsulate Phase Change Materials with Non-Toxic and Biocompatible Chemicals

Flexible Monolithic Phase Change Material Based on Carbon Nanotubes/chitosan/poly(vinyl Alcohol)

Flexible monolithic phase change material based on carbon nanotubes/chitosan/poly (vinyl alcohol)

Construction and Design of Paraffin/PVDF Hollow Fiber Linear-Phase Change Energy Storage Materials

Polyacrylonitrile/polyethylene Glycol Phase-Change Material Fibres Prepared with Hybrid Polymer Blends and Nano-Sic Fillers Via Centrifugal Spinning

Investigation of Phase Change Material Encapsulation by Complex Coacervation

Scalable Flexible Phase Change Materials with a Swollen Polymer Network Structure for Thermal Energy Storage

Experimental study on a functional microencapsulated phase change material for thermal management

Controlled microfluidic encapsulation of phase change material for thermo-regulation