Abstract:Hybrid silica monoliths functionalized with octyl groups and dedicated to chromatographic separations in the reversed-phase mode were directly synthesized within capillaries according to the protocol described by Yan et al. [L.J. Yan, Q.H. Zhang, Y.Q. Feng, W.B. Zhang, T. Li, L.H. Zhang, Y.K. Zhang, J. Chromatogr. A 1121 (2006) 92]. Although these monoliths allowed reaching high efficiencies in capillary electrochromatography (CEC), serious limitations prohibited their application in nano-liquid chromatography (nano-LC). Such limitations observed as poor performances in the nano-LC mode and the lack of reproducibility of the synthesis were related to the longitudinal morphological inhomogeneities of the hybrid material along the capillary. Thus, several modifications were conducted in the synthesis protocol in order to improve the resulting morphology of the monolith making it suitable for nano-LC separations. The influence of several critical parameters (such as the addition temperature of the basic catalyst and the hydrolysis duration) on the textural and chromatographic properties had been extensively studied. It was found that a decrease (i.e. 0 degrees C) of the temperature addition of the basic catalyst associated with a shorter hydrolysis duration (1h instead of 6h) allowed (i) delaying the gelation time and consequently facilitating the capillary filling step, (ii) increasing the structural homogeneity of the hybrid monoliths, i.e. their chromatographic performances in nano-liquid chromatography also (iii) greatly improving the reproducibility of the synthesis within the capillary without impairing the material's carbon load, i.e. the incorporation of the less hydrolysable C(8) precursor. The resulting hybrid monoliths afforded retention factors comparable to that previously obtained for C(18) grafted silica monoliths and efficiencies that are the best ever recorded in nano-LC with hybrid monoliths and that are close to the ones achieved with grafted silica monoliths. In fact, this modified protocol allowed a significant improvement of the performances in nano-LC which could be observed by the decrease of the mean value of H(min) going from 123 microm (Yan's protocol) to 24 microm (modified protocol) for a same length of capillary (l = 8.5 cm). In addition, the reproducibility of the synthesis was greatly improved through a factor six of reduction on the calculated standard deviation of these efficiencies. The high permeability and longitudinal homogeneity of the synthesized monolith allowed increasing the capillary length (for example, a 75-cm capillary was conveniently filled with hybrid silica monolith) and the column could be eluted at a very low backpressure leading to chromatographic performances up to 40,000 plates. Finally, the good efficiencies in the nano-LC mode combined with the excellent performances already present in the CEC mode led to fast (less than 1 min) and high efficient separations in the pressurized capillary electrochromatography (p-CEC) mode.

Tunable thick porous silica coating fabricated by multilayer-by-multilayer bonding of silica nanoparticles for open-tubular capillary chromatographic separation.

Polymer-modified fibrous mesoporous silica nanoparticles as coating material for open-tubular capillary electrochromatography.

A mesoporous silica nanoparticles immobilized open-tubular capillary column with a coating of cellulose tris(3,5-dimethylphenyl-carbamate) for enantioseparation in CEC.

Silica spheres coated with C18-modified gold nanoparticles for capillary LC and pressurized CEC separations.

Preparation and Evaluation of 3 M Open Tubular Capillary Columns with a Zwitterionic Polymeric Porous Layer for Liquid Chromatography.

Fabrication of Monodisperse Porous Silica Microspheres with a Tunable Particle Size and Pore Size for Protein Separation.

Use of Gel-Casting to Prepare HPLC Monolithic Silica Columns with Uniform Mesopores and Tunable Macrochannels

Controlled Fabrication of Silica@Covalent Triazine Polymer Core-Shell Spheres as a Reversed-Phase/Hydrophilic Interaction Mixed-Mode Chromatographic Stationary Phase

Capillary Coated with Layer-by-Layer Assembly of γ-Zirconium Phosphate/ Lysozyme Nanocomposite Film for Open Tubular Capillary Electrochromatography Chiral Separation

Open-tubular Capillary Electrochromatography with Janus Structured Au-Fe3O4 Nanoparticles Coating As Stationary Phase

Preparation of particle-fixed silica monoliths used in capillary electrochromatography.

Submicron Nonporous Silica Particles for Enhanced Separation Performance in Pcec.

Preparation and Performance of Inorganic Silica Gel-organic Polymer Mixture Based C_(16) Capillary Monolithic Column

Preparation and Evaluation of Ultra-Long Open-Tubular Polymeric Porous Layer Capillary Columns with Modified MIL-100(Fe) for Liquid Chromatography

Optimization of the single-step synthesis of hybrid C(8) silica monoliths dedicated to nano-liquid chromatography and capillary electrochromatography

Open-tubular Gas Chromatography Using Capillary Coated with Octadecylamine-Capped Gold Nanoparticles.

Preparation and evaluation of C18-bonded 1-μm silica particle for pressurized capillary electrochromatography

Preparation of Open Tubular Capillary Column Covalently Coated with Polystyrene Sulfonate with 4,4-Azobis(4-cyanopentanoyl Chloride) As Polymerization Initiator for Electrochromatographic Separation of Alkaloids, Sulfonamides, and Peptides

Preparation and Characterization of Sol-Gel SE-30-Coated Silica Stationary Phase for Capillary Liquid Chromatography

Monolithic silica xerogel capillary column for separations in capillary LC and pressurized CEC.

Preparation and Evaluation of Organic-Inorganic Hybrid Silica-Based Monolithic Columns for Capillary Electrochromatography