Abstract:Ultrasound-induced cavitation in blood vessels is a common scenario in medical procedures. This paper focuses on understanding the mechanism of microscopic damage to vessel walls caused by the evolution of cavitation bubbles within the vessels. In this study, cavitation bubbles were generated using the low-voltage discharge method in 0.9% sodium chloride saline, and vessel models with wall thicknesses ranging from 0.7 mm to 2 mm were made using a 3D laminating process. The interaction between cavitation bubbles and vessel models with different wall thicknesses was observed using a combination of high-speed photography. Results show that cavitation bubble morphology and collapse time increased and then stabilized as the vessel wall thickness increased. When the cavitation bubble was located in vessel axial line, pair of opposing micro-jets were formed along the axis of the vessel, and the peak of micro-jet velocity decreased with increasing wall thickness. However, when the cavitation bubble deviated from the vessel model center, no micro-jet towards the vessel model wall was observed. Further analysis of the vessel wall deformation under varying distances from the cavitation bubble to the vessel wall revealed that the magnitude of vessel wall stretch due to the cavitation bubble expansion was greater than that of the contraction. A comparative analysis of the interaction of between the cavitation bubble and different forms of elastic membranes showed that the oscillation period of the cavitation bubble under the influence of elastic vessel model was lower than the elastic membrane. Furthermore, the degree of deformation of elastic vessel models under the expansion of the cavitation bubble was smaller than that of elastic membranes, whereas the degree of deformation of elastic vessel models in the contraction phase of the cavitation bubble was larger than that of elastic membranes. These new findings provide important theoretical insights into the microscopic mechanisms of blood vessel potential damage caused by ultrasound-induced cavitation bubble, as well as cavitation in pipelines in hydrodynamic systems.

Studies on the Tempo of Bubble Formation in Recently Cavitated Vessels: A Model to Predict the Pressure of Air Bubbles

New possible mechanisms of embolism formation when measuring vulnerability curves by air injection in a pressure sleeve.

The Dynamic Behaviour of Cavitation Bubble Within Ultrasonic Field and Its Interaction Mechanism with Dendrites

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

Numerical Investigation on the Collapse of a Bubble Cluster Near a Solid Wall

Experimental study on damage mechanism of blood vessel by cavitation bubbles

What Happens when Stems Are Embolized in a Centrifuge? Testing the Cavitron Theory.

Ultrasonic emissions reveal individual cavitation bubbles in water-stressed wood

Visual and Hydraulic Techniques Produce Similar Estimates of Cavitation Resistance in Woody Species.

A new cavitation model based on evaporation and condensation theory

Modeling the Distribution Characteristics of Vapor Bubbles in Cavitating Flows

Numerical investigation of the cavitation bubble near the solid wall with a gas-entrapping hole based on a fully compressible three-phase model

Experimental Investigation on the Cavity Evolution and Dynamics with Special Emphasis on the Development Stage of Ventilated Partial Cavitating Flow

On the mechanism for winter stem pressure build-up in walnut trees

Study on the Dynamic Characteristics of Single Cavitation Bubble Motion near the Wall Based on the Keller–Miksis Model

Turbulence and Cavitation Models for Time-Dependent Turbulent Cavitating Flows

Numerical Study of the Shock Wave and Pressure Induced by Single Bubble Collapse Near Planar Solid Wall

Impact-induced bubble interactions and coalescence in soft materials

What Causes the Differences in Cavitation Resistance of Two Shrubs? Wood Anatomical Explanations and Reliability Testing of Vulnerability Curves.

Modeling Cavitating Venturi Flows

Numerical Investigation on the Hydrodynamic Performance with Special Emphasis on the Cavitation Intensity Detection in a Venturi Cavitator