Abstract:Flexible piezoresistive pressure sensors based on a graphene-elastomer composite have gained popularity as electronic wearable sensors due to their simplicity and promising practical application in health monitoring and wearable devices. There is an urgent need to develop pressure sensors that are simplistic in design with good sensitivity and equally capable of production in large volumes. Studies have shown that implementing micro/nanostructures improves the sensitivity of graphene-elastomer pressure sensors. Therefore, in this paper, we fabricated thick nano wrinkles on a graphene-elastomer sandwich structure through a rapid thermal annealing procedure. The wrinkled structure was fabricated by rapid thermal annealing of spin-coated PEDOT:PSS (PH1000) on graphene-PDMS composite to facilitate the generation of wrinkles and optimize the sensitivity of our pressure sensor. We performed analyses on our pressure sensor under various compressive loading ranges. The pressure sensor detected pressure applied at these various ranges within a reasonable response time of 160ms and demonstrated excellent repeatability without hysteresis. In addition, we observed satisfactory sensitivity under tensile strain exhibiting high stretchability. The sensor displayed good sensitivity of 2.83 kPa−1 from compressive loading in the low-pressure range 0 Pa −490 Pa, and from 490 Pa-10 kPa the sensitivity was 0.12k Pa−1. The sensor demonstrated stretchability of up to 50% with a gauge factor of 20.1. We observed that it is highly responsive in the lower pressure range and capable of detecting subtle pressure. Furthermore, we demonstrated pressure detection in human motion monitoring. Overall, the pressure sensor displayed potential applications in human monitoring devices and wearable electronics.

A Graphene-Based Resistive Pressure Sensor With Record-High Sensitivity In A Wide Pressure Range

An Ultra-Sensitive Resistive Pressure Sensor Based on the V-shaped Foam-Like Structure of Laser-Scribed Graphene

The Development of a Highly Sensitive, Broad-Range Hierarchically Structured Reduced Graphene Oxide/PolyHIPE Foam for Pressure Sensing.

Electrostatic Jet Engineering of Flexible Composite Pressure Sensors for Physical Applications

Bioinspired gradient stretchable aerogels for ultrabroad-response-range wearable pressure sensors

Flexible pressure sensors based on reduced graphene oxide @ porous silicone elastomers with good resolution and wide working range

Highly Flexible and Compressible 3D Interconnected Graphene Foam for Sensitive Pressure Detection

Towards ultra-wide operation range and high sensitivity: Graphene film based pressure sensors for fingertips

Laser Patterned Graphene Pressure Sensor with Adjustable Sensitivity in an Ultrawide Response Range

A Highly Sensitive Flexible Pressure Sensor Based on Laser-Induced Graphene and a Composite Dielectric Structure

Highly responsive screen-printed asymmetric pressure sensor based on laser-induced graphene

Ultrafast Dynamic Pressure Sensors Based on Graphene Hybrid Structure

A graphene flexible pressure sensor based on a fabric-like groove structure for high-resolution tactile imaging

Bubble‐Decorated Honeycomb‐Like Graphene Film As Ultrahigh Sensitivity Pressure Sensors

Fabrication of Low-Cost and Highly Sensitive Graphene-Based Pressure Sensors by Direct Laser Scribing Polydimethylsiloxane

Design of Flexible Pressure Sensor Based on Conical Microstructure PDMS-Bilayer Graphene

High Sensitivity and Wide Range Biomimetic Tactile-Pressure Sensor Based on 2D Graphene Film and 3D Graphene Foam

Highly Sensitive and Flexible Tactile Sensor Based on the Fabrication of Porous Graphene/Silicone Rubber Composites

Flexible, Highly Sensitive Pressure Sensor with a Wide Range Based on Graphene-Silk Network Structure

Flexible Pressure Sensor Based on a Thermally Induced Wrinkled Graphene Sandwich Structure

All-Transparent Graphene-Based Flexible Pressure Sensor Array