Effect of Carbon/Nitrogen Ratio on Short-Cut Nitrification and Denitrification of Polyurethane Biofilm Reactor

Chong Tan,Ying-Jie Liu,Wei Wang,Shan Qiu,Fang Ma
DOI: https://doi.org/10.13227/j.hjkx.2014.10.024
2014-01-01
Abstract:The short-cut nitrification and denitrification process of a polyurethane biofilm reactor was studied at four different carbon to nitrogen ratios (C/N ratios) (C/N =15:1, 10:1, 5:1 and 1. 8:1) with focus on reactor performance and microbial community composition. Results showed that when the influent carbon/nitrogen ratio decreased from 15 to 10, 5 and 1. 8, the nitrite accumulation rate was increased from 56. 1% to 62. 3%, 72. 3% and 83. 2% after 100 d operation. System achieved the optimal removal efficiency at an influent carbon/nitrogen ratio of 10 with 99. 1% of ammonia removal and 91. 0% of total nitrogen removal. Simultaneous nitrification and denitrification occurred in the polyurethane biofilm system at different influent carbon/nitrogen ratio. As the influent carbon/nitrogen ratio decreased from 15 to 10, 5 and 1. 8, the efficiency of simultaneous nitrification and denitrification was gradually reduced. The microbial biofilm analysis indicated that the microbial diversity of biofilm with an influent carbon/nitrogen ratio of 15 was significantly higher than that in other conditions. The predominant ammonia oxidizing bacteria and nitrite oxidizing bacteria were Nitrosospira sp. and Nitrospira sp. , respectively, and the predominant denitrifying bacteria were Pseudomonas sp. .
What problem does this paper attempt to address?