Abstract:Pure titanium is limited to be used in biomedical applications due to its lower mechanical strength compared to its alloy counterpart. To enhance its properties and improve medical implants feasibility, advancements in titanium processing technologies are necessary. One such technique is equal-channel angular pressing (ECAP) for its severe plastic deformation (SPD). This study aims to surface modify commercially pure titanium using micro-arc oxidation (MAO) or plasma electrolytic oxidation (PEO) technologies, and mineral solutions containing Ca and P. The composition, metallography, and shape of the changed surface were characterized using X-ray diffraction (XRD), digital optical microscopy (OM), and scanning electron microscope (SEM), respectively. A microhardness test is conducted to assess each sample's mechanical strength. The weight % of Ca and P in the coating was determined using energy dispersive spectroscopy (EDS), and the corrosion resistance was evaluated through potentiodynamic measurement. The behavior of human dental pulp cell and periodontal cell behavior was also studied through a biomedical experiment over a period of 1-, 3-, and 7-days using culture medium, and the cell death and viability can be inferred with the help of enzyme-linked immunosorbent assay (ELISA) since it can detect proteins or biomarkers secreted by cells undergoing apoptosis or necrosis. This study shows that the mechanical grain refinement method and surface modification might improve the mechanical and biomechanical properties of commercially pure (CP) titanium. According to the results of the corrosion loss measurements, 2PassMAO had the lowest corrosion rate, which is determined to be 0.495 mmpy. The electrode potentials for the 1-pass and 2-pass coated samples are 1.44 V and 1.47 V, respectively. This suggests that the coating is highly effective in reducing the corrosion rate of the metallic CP Ti sample. Changes in the grain size and the presence of a high number of grain boundaries have a significant impact on the corrosion resistance of CP Ti. For ECAPED and surface-modified titanium samples in a 3.6% NaCl electrolyte solution, electrochemical impedance spectroscopy (EIS) properties are similar to Nyquist and Bode plot fitting. In light of ISO 10993-5 guidelines for assessing in vitro cytotoxicity, this study contributes valuable insights into pulp and periodontal cell behavior, focusing specifically on material cytotoxicity, a critical factor determined by a 30% decrease in cell viability.

Retraction Note To: Effect of Coupling Asynchronous Acoustoelectric Effects on the Corrosion Behavior, Microhardness and Biocompatibility of Biomedical Titanium Alloy Strips.

RETRACTED:Microhardness and Corrosion Behavior of Surface Gradient Oxide Coating on the Titanium Alloy Strips under High Energy Electro-Pulsing Treatment

Improving Pure Titanium's Biological and Mechanical Characteristics through ECAP and Micro-Arc Oxidation Processes

RETRACTED: Effects of High-Energy Electro-Pulsing Treatment on Microstructure, Mechanical Properties and Corrosion Behavior of Ti–6Al–4V Alloy

Recent Advancements in Surface Modification, Characterization and Functionalization for Enhancing the Biocompatibility and Corrosion Resistance of Biomedical Implants

Effects of the micro-nano surface topography of titanium alloy on the biological responses of osteoblast

Biocompatibility and antibacterial performance of titanium by surface treatment

Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants

Efficacy of Combined Mechanical and Chemical Decontamination Treatments on Smooth and Rough Titanium Surfaces and Their Effects on Osteoconduction: An Ex Vivo Study

Enhanced Surface Mechanical Properties and Microstructure Evolution of Commercial Pure Titanium under Electropulsing-Assisted Ultrasonic Surface Rolling Process

Influence of Surface Nano-Structuring on Microstructure, Corrosion Behavior and Osteoblast Response of Commercially Pure Titanium Treated Through Ultrasonic Shot Peening

Retracted: Effect of High‐Energy Electropulsing on the Phase Transition and Mechanical Properties of Two‐Phase Titanium Alloy Strips

Promoting Bone Mesenchymal Stem Cells and Inhibiting Bacterial Adhesion of Acid-Etched Nanostructured Titanium by Ultraviolet Functionalization

Effect of Anodic Oxidation Pulse Voltage on Antibacterial Properties and Biocompatibility of Ti-Ag Alloy

RETRACTED: Effect of Electropulsing Treatment and Ultrasonic Striking Treatment on the Mechanical Properties and Microstructure of Biomedical Ti-6Al-4v Alloy

High-performance bioceramic coatings of 3D printed titanium alloys via FS-auxiliary micro-arc oxidation manufacturing

Enhancing the In Vitro Tribocorrosion Resistance of Titanium Alloy by Precipitation of Nano-Ti2Cu Phases

Effect of Electrolytic Plasma Polishing on Surface Properties of Titanium Alloy

Micro/nano-surface Modification of Titanium Implant Enhancing Wear Resistance and Biocompatibility

Improved Wear and Corrosion Resistance of Microarc Oxidation Coatings on Ti–6Al–4V Alloy with Ultrasonic Assistance for Potential Biomedical Applications

Influence of ultrasonic shot peening on the surface acid etching behavior of pure titanium