Abstract:One of the advantages of perovskite solar cells is able to be compatible with low-cost large-scale solution process via roll-to-roll technique. Green solvent engineering plays an important role in large-scale manufacture. N-methyl pyrrolidone (NMP) is considered to be low toxicity and biodegradable, which is less harmful to the human body and the environment. However, it is difficult to achieve high film quality for NMP-processed perovskite film in a short time. In this communication, we develop a two-step green anti-solvent engineering to fast tune the morphology of the NMP-processed perovskite film. The first step is to deposit ethyl acetate (EA) on top of the precursor film to induce fast nucleation. Secondly, methylammonium chloride (MACl) solution dissolved in isopropanol (IPA) is added to affect the crystal growth process and subsequently form a two-layer structured perovskite film including MAPbI3 as a bottom layer and mixed MAPbI3/MAPbIxCl1-x as an upper layer, respectively. The upper layer shows significantly enhanced degree of crystallinity and reduced trap states. It has been recognized that MAPbIxCl1-x has a wide bandgap with a higher LUMO level and a lower HOMO level than that of MAPbI3. Thus, the enrichment of Cl based perovskite near/at the surface can not only promote the efficient charge transfer, but also improve the VOC of PSCs. Furthermore, the limited content of MAPbIxCl1-x in MAPbI3 barely affects the whole absorption of the perovskite and thus JSC of the device. Thus, the as-prepared inverted PSC yields a high PCE of 16%, mainly attributing to obviously improved VOC and JSC, while the reference device containing the perovskite layer only treated by EA shows a PCE of 14.36%. Notably, NMP-processed perovskite film exhibits high transmittance of 22% in the 380−780 nm wavelength range, offering great potential in semi-transparent PSCs.

Efficient Hybrid Mesoscopic Solar Cells with Morphology-Controlled CH3NH3PbI3-xClx Derived from Two-Step Spin Coating Method.

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

A Highly Efficient Mesoscopic Solar Cell Based on CH₃NH₃PbI(3-x)Cl(x) Fabricated Via Sequential Solution Deposition.

High‐Performance Planar Solar Cells Based On CH3NH3PbI3‐xClx Perovskites with Determined Chlorine Mole Fraction

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Enhanced Performance of CH3NH3PbI3−xClx Perovskite Solar Cells by CH3NH3I Modification of TiO2-perovskite Layer Interface

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

Growth and Evolution of Solution-Processed CH3NH3PbI3-xClx Layer for Highly Efficient Planar-Heterojunction Perovskite Solar Cells

Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells

Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells

Fast Thermal Annealing of CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3-x</sub>Cl<sub>x</sub> Films for Improving Hybrid Photovoltaics

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

Enhanced Photovoltaic Performance of CH3NH3PbI3 Perovskite Solar Cells Through Interfacial Engineering Using Self-Assembling Monolayer.

A 19.0% Efficiency Achieved in CuOx-based Inverted CH3NH3PbI3−xClx Solar Cells by an Effective Cl Doping Method

Surfactant Enhanced Surface Coverage of CH 3 NH 3 PbI 3−x Cl X Perovskite for Highly Efficient Mesoscopic Solar Cells

Morphology-controlled CH3NH3PbI3 films by hexane-assisted one-step solution deposition for hybrid perovskite mesoscopic solar cells with high reproductivity

Efficient Perovskite Solar Cells Fabricated Through CsCl-Enhanced PbI2 Precursor Via Sequential Deposition.

High Efficient Planar-Heterojunction Solar Cells Achieved by Using A Smooth Ch3nh3pbi3 Film Via A New Approach of Forming the Pbi2 Nanostructure Together with Strategically High Ch3nh3i Concentration

Controlling the Intermediate Phase to Improve the Crystallinity and Orientation of Cs3Sb2ClxI9‐x Films for Efficient Solar Cells

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells