Abstract:This article presents a method of simulating molecular transport in capillary gas chromatography (GC) applicable to isothermal, temperature-programmed, and thermal gradient conditions. The approach accounts for parameter differences that can occur across an analyte band including pressure, mobile phase velocity, temperature, and retention factor. The model was validated experimentally using a GC column comprised of microchannels in a stainless-steel plate capable of isothermal, temperature-programmed, and thermal gradient GC separations. The parameters governing retention and dispersion in the transport model were fitted with 12 experimental isothermal separations. The transport model was validated with experimental data for three analytes using four temperature-programmed and three thermal gradient GC separations. The simulated peaks (elution time and dispersion) give reasonable predictions of observed separations. The magnitudes of the maximum error between simulated peak elution time and experiment were 2.6 and 4.2% for temperature-programmed and thermal gradient GC, respectively. The magnitudes of the maximum error between the simulated peak width and experiment were 15.4 and 5.8% for temperature-programmed and thermal gradient GC, respectively. These relatively low errors give confidence that the model reflects the behavior of the transport processes and provides meaningful predictions for GC separations. This transport model allows for an evaluation of analyte separation characteristics of the analyte band at any position along the length of the GC column in addition to peak characteristics at the column exit. The transport model enables investigation of column conditions that influence separation behavior and opens exploration of optimal column design and heating conditions.

Equivalence between the equilibrium dispersive and the transport model in describing band broadening in analytical gradient liquid chromatography.

Mathematical Model of the Dynamics of Countercurrent Chromatography

Enhancing Thermodynamic Consistency: Clarification on the Application of Asymmetric Activity Model in Multi-Component Chromatographic Separation

Comparing Two Models of Gradient Elution in Counter-Current Chromatography

Study of the peak variance in isocratic and gradient liquid chromatography using the transport model.

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Influence of pressure gradient on column efficiency in GC separations

Analytical solutions of the ideal model for gradient liquid chromatography.

Kinetic and Equilibrium Study of the Enantioseparation of Fluoxetine on a New Β-Cyclodextrin Column by High Performance Liquid Chromatography

Analysis of the Ideal Model for A Single Component in Preparative Gradient Elution Chromatography

Investigation of the Concentration Dependence of Mass Transfer Coefficients in Reversed-Phase Liquid Chromatography

Recursion Equations in Predicting Band Width under Gradient Elution

Modeling of thermal processes in very high pressure liquid chromatography for column immersed in a water bath: Application of the selected models

Simulating Capillary Gas Chromatographic Separations including Thermal Gradient Conditions

[The Basic Model and Its Peculiarity of Relaxation Theory in Chromatography].

Influence of the Distortion of Gradient Profile on Peak Width in Gradient Liquid Chromatography

Evaluation of the peak variance in gradient liquid chromatography.

WENO scheme on characteristics for the equilibrium dispersive model of chromatography with generalized Langmuir isotherms

On the modeling of the effective longitudinal diffusion in bi-continuous chromatographic beds

Aggregate Models Based On The Wave Propagation Theory For High-Purity Distillation Columns