Abstract:The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110] oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire,i.e., [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt).The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio.Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small.Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one,which implies the experimental predictions of Young's modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young's modulus as obtained via resonance testing.

Elastic Properties of GaN Nanowires: Revealing the Influence of Planar Defects on Young's Modulus at Nanoscale

In Situ Mechanical Resonance Behaviour of Pristine and Defective Zinc Blende GaAs Nanowires

Exploration of the Defect’s Effect on the Mechanical Properties of Different Orientated Nanowires

Atomistic Exploration of Deformation Properties of Copper Nanowires with Pre-Existing Defects

Bending Properties of Ag Nanowires with Pre-Existing Surface Defects

Influence of Pre-Exsiting Surface Defects on the Vibrational Properties of Ag Nanowires

Molecular Dynamics Study Of Dynamic Buckling Properties Of Nanowires With Defects

Atomistic Numerical Investigation of Single-crystal Copper Nanowire with Surface Defects

MD Investigations for Mechanical Properties of Copper Nanowires with and Without Surface Defects

Super deformability and Young's modulus of GaAs nanowires.

Effective Geometric Size and Bond-Loss Effect in Nanoelasticity of GaN Nanowires

Beat Phenomena in Metal Nanowires, and Their Implications for Resonance-Based Elastic Property Measurements.

Mechanical Responses of A-Axis GaN Nanowires under Axial Loads.

Strong Hall-Petch Type Behavior in the Elastic Strain Limit of Nanotwinned Gold Nanowires

Size Dependence of Young's Modulus in ZnO Nanowires.

Elastic modulus of β-Ga2O3 nanowires measured by resonance and three-point bending techniques

Bending strain effects on the optical and optoelectric properties of GaN nanowires

Mechanical Properties of Individual Inas Nanowires Studied by Tensile Tests

Influence of point and linear defects on thermal and mechanical properties of germanium nanowire: a molecular dynamics study

Numerical Evaluation of the Elastic Moduli of AlN and GaN Nanosheets

First principles study on the thermoelectric properties of GaN nanowires with C N point defects