Abstract:Enhancing the lubrication property and bacterial resistance is extremely important for interventional biomedical implants to avoid soft tissue damage and biofilm formation. In this study, a zwitterionic phosphorylcholine coating (PMPC) was successfully developed to achieve surface functionalization of a polyurethane (PU)-based ureteral stent via subsurface "grafting from" photopolymerization. Typical surface characterizations such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and surface wettability and morphology analyses examined by scanning electron microscopy, atomic force microscopy, and transmission electron microscopy demonstrated that the phosphorylcholine polymer was grafted on the substrate with a thickness of 180 nm. Additionally, the tribological experiment performed by a universal material tester showed that the lubrication performance of PU–PMPC was significantly improved compared with that of PU. The in vitro experiments indicated that the PMPC coating was biocompatible and stably modified on the surface of the substrate with an excellent bacterial resistance rate of >90%. Furthermore, the result of the in vivo experiment showed that the anti-encrustation performance of the surface-functionalized ureteral stent was better than that of the bare ureteral stent. The great enhancement in the lubrication, bacterial resistance, and anti-encrustation properties of the phosphorylcholine coating was thought to be due to the hydration effects of the zwitterionic charges. In summary, the bioinspired zwitterionic phosphorylcholine coating developed herein achieved significantly improved lubrication, bacterial resistance, and anti-encrustation performances and could be used as a convenient approach for surface functionalization of interventional biomedical implants.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.2c00263.Standard curve of benzophenone in an ethanol solution at different concentrations (Figure S1) and enlarged SEM image and corresponding EDS results of the detached encrustation and the encrustation on the superficial surface from the bare PU ureteral stent (Figure S2) (PDF)This article has not yet been cited by other publications.

Choline Phosphate Functionalized Surface: Protein-Resistant but Cell-Adhesive Zwitterionic Surface Potential for Tissue Engineering

PC Technology Improving the Hemocompatibility of Polymer Membranes Developed for Biomedical Application

Parallel Control over Surface Charge and Wettability Using Polyelectrolyte Architecture: Effect on Protein Adsorption and Cell Adhesion.

Thermal Reversal Surface with “Sticky Tentacle” for Modulating Initial Cell Adhesion and Detachment

Simple Multipurpose Surface Functionalization by Phase Transited Protein Adhesion

Tailoring polyelectrolyte architecture to promote cell growth and inhibit bacteria adhesion.

Engineered, robust polyelectrolyte multilayers by precise control of surface potential for designer protein, cell and bacteria adsorption.

Surface modification of chitosan by electrostatic adsorption with polyanion bearing phosphorylcholine groups

Surface modification of biomedical materials with cell membrane mimetic structures

Fabrication and hemocompatibility of cell outer membrane mimetic surfaces on chitosan by layer by layer assembly with polyanion bearing phosphorylcholine groups.

Anti-biofouling and functionalizable bioinspired chitosan-based hydrogel coating via surface photo-immobilization

Biomimetic phosphorylcholine-modified bacterial cellulose membranes with cell fouling resistance

Preparation and antifouling properties of 2-(meth-acryloyloxy)ethyl cholinephosphate based polymers modified surface with different molecular architectures by ATRP.

Cell outer membrane mimetic modification of a cross-linked chitosan surface to improve its hemocompatibility.

Construction of a Biomimetic Surface on Microfluidic Chips for Biofouling Resistance

Amplified Effect of Surface Charge on Cell Adhesion by Nanostructures.

Surface Modification of Cellulose Membranes with Zwitterionic Polymers for Resistance to Protein Adsorption and Platelet Adhesion

Bioinspired Phosphorylcholine Coating for Surface Functionalization of Interventional Biomedical Implants with Bacterial Resistance and Anti-Encrustation Properties

From Neutral to Zwitterionic Poly(α-Amino Acid) Nonfouling Surfaces: Effects of Helical Conformation and Anchoring Orientation.

Surface Engineering of Poly(d,l‐lactic Acid) by Entrapment of Chitosan‐based Derivatives for the Promotion of Chondrogenesis

Modification of biomaterials surface by mimetic cell membrane to improve biocompatibility