Abstract:Cavity ring-down spectroscopy (CRDS) is a highly sensitive molecular absorption spectroscopic technology, which has been widely used in mirror reflectance measurement, atmospheric trace gas detection, molecular precision spectroscopy and other fields. It deduces the intracavity absorption by measuring the rapid variation of the ringdown signal. As a result, detector with high linearity, broad bandwidth and low electrical noise is indispensable. Additionally, owing to the large noise in laser frequency, low laser-to-cavity coupling efficiency is obtained. Consequently, the cavity transmission is faint, which deteriorates the detection sensitivity. Optical feedback can address this problem by locking the laser to the cavity longitudinal mode. Then, the laser frequency noise is suppressed and hence better detection sensitivity is expected. Optical feedback CRDS with V-shape cavity has been widely studied. Compared with Fabry-Perot cavity, this cavity geometry is very sensitive to mechanical vibration and possesses low degree of fineness due to an additional mirror. In this paper, optical feedback linear cavity ring-down spectroscopy based on a Fabry-Perot cavity with a degree of fineness of 7800 is presented. The principle of the combination of optical feedback and linear cavity is explained from the perspective of the light phase, which shows that the reflection will not generate efficient optical feedback if the feedback phase is appropriately controlled and laser to cavity locking can be therefore realized. And then, the factors influencing the stability of ring-down signal are analyzed, including the feedback ratio, the trigger voltage for the ringdown event, and the distance between the light spot and the detector center. The experimental results show that a superior fractional uncertainty of the empty ringdown time of 0.026% can be obtained with a low feedback rate (3% FSR), a high ringdown signal trigger threshold (90% cavity mode amplitude) and superposition of the light spot with the detector center. With Allan variance analysis, the white noise response of 1.6 × 10 –9 cm –1 ·Hz –1/2 and the detection sensitivity of 1.3 × 10 –10 cm –1 for trace gas detection can be achieved in an integration time of 180 s, corresponding to the lowest CH 4 concentration detection of 0.35 × 10 –9 at 6046.9 cm –1 . This robust spectroscopic technique paves the way for constructing high-sensitive and stable-cavity based instrument for trace gas detection.

Simultaneous determination of optical loss, residual reflectance and transmittance of highly anti-reflective coatings with cavity ring down technique.

Simultaneous mapping of reflectance, transmittance and optical loss of highly reflective and anti-reflective coatings with two-channel cavity ring-down technique

Error Analysis of the Loss Measurement of Super High Reflectivity Components Using Continuous CRD Technique

Precise Reflectance/Transmittance Measurements of Highly Reflective Optics with Saturated Cavity Ring-Down Signals

High Reflectivity Measurement with Cavity Ring-Down Technique

Optical Feedback Cavity Ring-Down Technique for Accurate Measurement of Ultra-High Reflectivity

Simultaneous Measurement of S- and P-Polarization Reflectivity Using Optical Feedback Cavity Ring Down Technique

Continuous-Wave Cavity Ring-Down Technique for Accurate Measurement of High Reflectivity

Accurate high reflectivity measurement based on a novel optical feedback cavity ring-down technique

Measurement Of Low Loss And Mirrors' Reflectivity Using Cavity Ring Down Spectroscopy With High Accuracy

Effect of instrumental response time in exponential-decay based cavity ring-down techniques for high reflectivity measurement - art. no. 67201E

Experimental study of reflectivity measurement of single wavelength by cavity ring-down method

Measurement of the Reflection and Loss of the Hybrid Air-Core Photonic-Bandgap Fiber Ring Resonator

Study on Precise Measurement of High Reflectivity by Cavity Ring-Down Spectroscopy

Uncertainty of optical feedback linear cavity ringdown spectroscopy

Measurement of ultra—low losses in optical supercavity with CW laser source

Extinction Measurement with Open-Path Cavity Ring-Down Technique of Variable Cavity Length

Ray-transfer-matrix Model for Accurate Pulsed Cavity Ring-Down Measurement in the Mismatching Case

Measurements of excess loss of the crossed waveguide using optical waveguide ring resonators

Light Scattering Defects and Measurement Accuracy in Cavity Ring-Down Spectroscopy

System design and signal analysis of cavity ring-down absorption spectroscopy