Abstract:Perovskite and perovskite/silicon tandem solar cells hold great promise for commercialization for their high efficiency and low cost. One of the major challenges for semi-transparent perovskite and tandem devices is the availability of suitable transparent electrodes. Here, we report an alternative high-performance cerium-doped indium oxide (ICO) transparent electrode with high mobility, low carrier concentration and high transmittance by Radio frequency (RF) magnetron sputtering at room temperature (RT) for thus applications. A high mobility of 51.6 cm(2)/Vs, a low resistivity of 5.74 x 10(-4) Omega cm as well as a high average transmittance of 83.5% ranging from 400 nm to 1800 nm were obtain at RT. The spectral response of a planar semi-transparent perovskite solar cell (ST-PSC) proportion accelerated in 450-700 nm range and resulted in an absolute 1.1 mA/cm(2) (from 17.38 to 18.48 mA/cm(2)) and L47 mA/cm(2) (from 13.63 to 15.10 mA/cm(2)) short-circuit current improvement by replacing commercial ITO electrodes with ICO at different illuminate sides. Finally, the preliminary perovskite/silicon-heterojunction (SHJ) two-terminal tandem solar cell achieves a relative 8.06% improvement in power conversion efficiency (PCE) (from 18.85% to 20.37%) in the use of ICO transparent electrode, illustrating a promising alternative transparent electrode to further improve high-efficiency semi-transparent perovskite and its tandem solar cells.

Semitransparent Inverted Polymer Solar Cells Employing a Sol-Gel-derived TiO2 Electron-Selective Layer on FTO and MoO3/Ag/MoO3 Transparent Electrode.

Semitransparent Inverted Polymer Solar Cells with MoO3/Ag/MoO3 As Transparent Electrode

Semitransparent inverted polymer solar cells using MoO3/Ag/ V2O5 as transparent anodes

Efficient Inverted Polymer Solar Cells Based on Surface Modified Fto Transparent Electrodes

High‐Performance Colorful Semitransparent Polymer Solar Cells with Ultrathin Hybrid‐Metal Electrodes and Fine‐Tuned Dielectric Mirrors

Flexible inverted polymer solar cells with an indium-free tri-layer cathode

Indium Tin Oxide-Free Inverted Polymer Solar Cells with Ultrathin Metal Transparent Electrodes

Efficient and Stable Inverted Polymer Solar Cells Using TiO2 Nanoparticles and Analysized by Mott-Schottky Capacitance

Synergic Interface and Optical Engineering for High‐Performance Semitransparent Polymer Solar Cells

Semitransparent Ternary Nonfullerene Polymer Solar Cells Exhibiting 9.40% Efficiency and 24.6% Average Visible Transmittance

Semi-transparent Polymer Solar Cells with All-Copper Nanowire Electrodes

Efficient Semitransparent Inverted Polymer Solar Cells with the Anode of Tunable Incident Light Transmittance

Towards high efficiency solution processable inverted bulk heterojunction polymer solar cells using modified indium tin oxide cathode

Efficient Inverted Polymer Solar Cells Based on Conjugated Polyelectrolyte and Zinc Oxide Modified ITO Electrode

Semi-transparent polymer solar cells with optical adjusting layers

Ito-Free Semitransparent Organic Solar Cells Based on Silver Thin Film Electrodes

Semitransparent Inverted Polymer Solar Cells Using Moo3/Ag/Wo3 As Highly Transparent Anodes

Highly Efficient, ITO-Free Polymer Solar Cells Using Ultrathin Copper Film As Transparent Electrode

Cerium-doped Indium Oxide Transparent Electrode for Semi-Transparent Perovskite and Perovskite/silicon Tandem Solar Cells

Colored semitransparent polymer solar cells with a power conversion efficiency of 9.36% achieved by controlling the optical Tamm state

Semitransparent Perovskite Solar Cells with Dielectric/Metal/Dielectric Top Electrodes