Abstract:Long-range surface plasmon resonance (LRSPR), generated from a coupled plasmon polariton in a thin metal slab sandwiched by two dielectrics, has attracted more and more attention due to its merits, such as longer propagation and deeper penetration than conventional single-interface surface plasmon resonance. Many useful applications related to light–medium interaction have been demonstrated based on the LRSPR effect, especially in the sensing area. Here, we propose and demonstrate an LRSPR-based refractive index sensor by using a SiO2-Au-TiO2 heterostructure, in which a D-shaped honeycomb-microstructure optical fiber (MOF) is designed as the silica substrate and then deposited with a gold film and thin-layer titanium dioxide (TiO2). By using the full-vector finite-element method (FEM), this heterostructure is numerically investigated and demonstrated to excite LRSPR without a buffer layer, which is usually necessary in previous LRSPR devices. Through comprehensive discussion about the influence of structural parameters on the resonant wavelength, the excitation of the LRSPR in the proposed heterostructure is revealed to be highly related to the effective refractive index of MOF’s fundamental core mode, which is mainly determined by the MOF’s pitch, the thicknesses of the silica web and the planar-layer silica. Moreover, the thin-layer TiO2 plays an important role in significantly enhancing the resonance and the sensitivity to analyte’s refractive index as well, when it is coated on the top of the Au film rather than between the metal and waveguide. Finally, the proposed LRSPR sensor based on SiO2-Au-TiO2 heterostructure shows an ultra-high wavelength sensitivity of 20,100 nm/RIU and the corresponding minimum resolution is as low as 4.98×10−7 RIU. Thus, the proposed LRSPR device offers considerable potential for sensing applications in biomedical and biochemical areas.

Plasmon waveguide resonance sensor using an Au-MgF2 structure.

A Symmetrical Optical Waveguide Based Surface Plasmon Resonance Biosensing System

A Waveguide-Coupled Surface Plasmon Resonance Sensor Using an Au-MgF2-Au Structure

Composite Layer Based Plasmon Waveguide Resonance for Label-Free Biosensing with High Figure of Merit

MgF2–Au–MgF2-polydopamine Based Surface Plasmon Resonance Sensor and Its Application in Biomedical Systems

Au-MgF2-Coated Photonic Crystal Fiber Surface Plasmon Resonance Sensor with High FOM

Theoretical and Experimental Investigation of an All-Fiber Waveguide Coupled Surface Plasmon Resonance Sensor with Au–ZnO–Au Sandwich Structure

Self-Referenced Plasmon Waveguide Resonance Sensor Using Different Waveguide Modes

Advancing Sensitivity in Guided-Wave Surface Plasmon Resonance Sensor through Integration of 2D BlueP/MoS2 Hybrid Layers

Electrical Detection of Plasmonic Waves Using an Ultra-Compact Structure Via a Nanocavity.

Mid-infrared chalcogenide slot waveguide plasmonic resonator sensor embedded with Au nanorods for surface-enhanced infrared absorption spectroscopy

High FOM PCF-SPR refractive index sensor based on MgF 2 -Au double-layer films

Surface plasmon resonance (SPR)-based biosensor using MXene as a BRE layer and magnesium oxide (MgO) as an adhesion layer

Modeling of Au-Nanowire Waveguide for Plasmonic Sensing in Liquids

Design of a Surface Plasmon Resonance Sensor Based on Grating Connection

A Symmetric MIM Waveguide Structure of a High-Sensitivity Refractive Index Sensor

Highly Sensitive Plasmon Refractive Index Sensor Based on MIM Waveguide

A Plasmonic Structure of Fano Resonance in the MIM Waveguide with r-Shaped Resonator for Refractive Index Sensor

[Research on Symmetrical Optical Waveguide Based Surface Plasmon Resonance Sensing with Spectral Interrogation].

Sensitivity Enhanced Refractive Index Fiber Sensor Based on Long-Range Surface Plasmon Resonance in SiO2-Au-TiO2 Heterostructure

Long-range Surface Plasmon Resonance Sensor Based on Side-Polished D-shaped Hexagonal Structure Photonic Crystal Fiber with the Buffer Layer of Magnesium Fluoride