Abstract:The long-term result of a total hip arthroplasty (THA) strongly depends on the correct component positioning of the acetabular cup and stem. To measure cup orientation out of a postoperative anteroposterior (AP) pelvic radiograph is highly inaccurate due to the wide variation of individual pelvic tilt and rotation. The goal of this study was to develop and validate a 2D-3D matching software (HipMatch) that allows matching a postoperative AP pelvic radiograph with a preoperative CT to accurately measure cup orientation corrected for individual pelvic orientation. The software is based on a spline-based multi-resolution 2D-3D image registration algorithm and a Markov random field theory based on similarity measurement. Based on a cone projection (imitating the path of the x-rays), the software is able to match the three-dimensional CT-based data set with the contours of the projected pelvis on the AP pelvic radiograph. This gives the possibility to correct the measured cup orientation (inclination and anteversion) by measuring it according to an anatomical defined coordinate system (anterior pelvic plane). The validation of the software consisted of accuracy, reproducibility and observer reliability measurements using cadaver and clinical data. For the cadaver validation 10 human pelves (20 hips) were used. From each pelvis 2 CT scans, one with and one without an inserted cup were acquired. The CT scan with the cup was used as the ground truth. With the cup inserted 4 AP pelvic radiographs with the pelvis in an unknown arbitrary position during acquisition were performed resulting in 80 measurements for accuracy. These measurements were performed by 2 observers at 2 different occasions resulting in a total of 320 measurements for reproducibility and observer reliability. The intraclass correlation coefficient (ICC) was used for quantification of reproducibility and observer reliability and the Bland-Altman analysis was used to detect systemic errors. The clinical validation included 33 patients with a pre- and a postoperative CT and 49 patients with only a postoperative CT in addition to the postoperative radiographs. In the cases with only a postoperative CT, for the 2D-3D matching the postoperative CT after manual excision of the cup from the CT slice sticks was used. In all cases the postoperative CT was used as the ground truth. For each patient all the available postoperative radiographs were used resulting in 236 measurements of accuracy. In the cadaver validation the cup orientation ranged from 34° – 57° for the inclination and from 1° – 24° for the anteversion measured on the CT. The accuracy showed a mean difference for the inclination of 0.9° ± 1.6° (−3.2° – 4.0°) and of 1.2 ± 2.4° (−5.3° – 5.6°) for the anteversion. The ICC for the reproducibility ranged from 0.96 to 0.99 and for the interobserver reliability from 0.95 to 0.98. No relevant systematic error was detected. In the clinical validation the cup orientation measured on the postoperative CT ranged for the inclination from 22° – 57° and for the anteversion from 7° – 35°. In the clinical setup the accuracy showed a mean difference for inclination of 1.8° ± 1.6° (−4.0° – 5.3°) and of −1.1° ± 2.9° (−5.9° – 5.7°) for the anteversion. The 2D-3D matching technique showed a good accuracy and a very good reproducibility and observer reliability. This technique allows to measure the exact cup orientation out of an AP pelvic radiograph with the help of a preoperative CT and to correct the parameters for the individual pelvic position. Therefore this software is a powerful tool to measure accuracy of CT-based computer-assisted cup placement in a large clinical series.

A Complete-Pelvis Segmentation Framework for Image-Free Total Hip Arthroplasty (THA): Methodology and Clinical Study

FACTS: Fully Automatic CT Segmentation of a Hip Joint

Fully Automatic Ct Segmentation For Computer-Assisted Pre-Operative Planning Of Hip Arthroscopy

Statistical model-based segmentation of the proximal femur in digital antero-posterior (AP) pelvic radiographs

A Modular Software System For 3d Measurement Of Acetabulum In Arthritic Dysplasia Hips

Fully Automatic Segmentation of Hip CT Images

ULTRASOUND BASED APP DETERMINATION FOR COMPUTER-ASSISTED THAS OPERATED IN LATERAL APPROACH

2D-3D Reconstruction-Based Planning of Total Hip Arthroplasty

VALIDATING A NEW REFERENCE PLANE FOR IMAGE-FREE NAVIGATION OF ACETABULAR CUP PLACEMENT

Fully Automatic Segmentation Of Ap Pelvis X-Rays Via Random Forest Regression And Hierarchical Sparse Shape Composition

Functional Acetabular Component Positioning During Direct Anterior Approach Hip Arthroplasty Using a Novel Three-Dimensional Virtual Mesh Imaging System With Fluoroscopy

An Integrated System for 3D Hip Joint Reconstruction from 2D X-rays: A Preliminary Validation Study

Segmentation of the Hip Joint in Ct Volumes Using Adaptive Thresholding Classification and Normal Direction Correction

HIPMATCH: A 2D-3D MATCHING SOFTWARE – ACCURATE AND RELIABLE

Automatic Segmentation Technique for Acetabulum and Femoral Head in CT Images

Determination of pelvic orientation from sparse ultrasound data for THA operated in the lateral position

A hybrid CT-free navigation system for total hip arthroplasty.

VALIDATION OF A NEW METHOD FOR STANDARDIZED EVALUATION OF PELVIC RADIOGRAPHS

Development and evaluation of an image-free computer-assisted impingement detection technique for total hip arthroplasty

MRI-based 3D models of the hip joint enables radiation-free computer-assisted planning of periacetabular osteotomy for treatment of hip dysplasia using deep learning for automatic segmentation

Assessment of Pelvic Tilt in Anteroposterior Radiographs by Area Ratio Based on Deep Learning