Abstract:Despite dominating the current commercial energy storage landscape, Li-ion batteries are fast approaching their theoretical limit. Meanwhile, Lithium Sulphur (Li-S) batteries, owing to their ultrahigh theoretical energy density of about 2600 Whkg -1 , low-cost, Earth-abundant, and environmentally friendly sulfur (S) cathode, are seen as promising replacements to realize energy densities beyond 500 Whkg -1 . Despite these advantages, the large-scale implementation of Li-S technology has been stymied due to several issues, one of the most deleterious of them is the dissolution and shuttling of polysulfide intermediates during cycling resulting in severe self-discharge, lowered S utilization and coulombic efficiency. Over the past decades, substantial amount of research towards mitigating 'polysulfide shuttling' shuttling has been focused on cathodic modification strategies such as infiltration of S in porous carbon, metal oxide or conducting polymer scaffold matrix which retard the mobility and loss of active material. However, such simple confinement strategies have been shown to be lacking over long cycling due to the relatively weak intermolecular interactions between the host and polysulfide molecules. An effective solution comes in the form of engineering 'sulfiphilic' materials that adsorb polysulfide species. For example, surface modification of cathodes with rGO and functionalized carbon species have shown success in reducing the redox shuttling. However, these approaches require elaborate preparation and hence, are limited in their practical usage. To overcome this, we propose a facile approach to improve cell performance via incorporation of functionalized graphenic species in the Li-S electrolyte. In this work, we have probed the impact of using tailored single-layer, heteroatom-doped graphene as electrolyte additives. We have studied the impact of their morphology and functionalization on the electrochemical performance of the cell. Results show a marked improvement in the discharge capacity and a high capacity retention of 84% over 105 cycles at 0.2 C cycling rate. The GCD cycle analysis showed an improvement in first cycle discharge plateau suggesting improved S utilization which was further substantiated by extensive postmortem analysis and polysulfide adsorption testing. Further, the electrolyte-modified cells showed an impressive three-fold and two-fold improvement in capacity at 1C and 2C cycling rates, respectively. These results demonstrated that tailored heteroatom-doped graphene in the form of electrolyte additive is an effective strategy to improve electrochemical performance via enhanced polysulfide encapsulation, cell conductivity and anode stabilization. Finally, we will present the effect of heteroatom-doped graphenic species on mitigation of polysulfide shuttling and cell performance when they are incorporated in the gel electrolyte system.

Enhancing Lithium–sulphur Battery Performance by Strongly Binding the Discharge Products on Amino-Functionalized Reduced Graphene Oxide

Ultrathin Dendrimer-Graphene Oxide Composite Film For Stable Cycling Lithium-Sulfur Batteries

Graphene Quantum Dots As Sulfiphilic and Lithiophilic Mediator Toward High Stability and Durable Life Lithium-Sulfur Batteries

N, S-doped Graphene Derived from Graphene Oxide and Thiourea-Formaldehyde Resin for High Stability Lithium-Sulfur Batteries

Incorporating Heteroatom-Doped Graphene in Electrolyte for High-Performance Lithium-Sulfur Batteries

Ultraﬁne Nanosulfur Particles Sandwiched in Little Oxygen-functionalized Graphene Layers as Cathodes for High Rate and Long-life Lithium-Sulfur Batteries.

Chemically Functionalized Graphene for High Performance Lithium/Sulfur Batteries

Tailoring Layered-Double-Hydroxide Nanostructures toward Long-Lifespan and Fast Kinetics Lithium–Sulfur Batteries

Vesicle-like sulfur/reduced graphene oxide composites for high performance lithium-sulfur batteries

Enhanced Electrochemical Kinetics in Lithium-Sulfur Batteries by Using Carbon Nanofibers/manganese Dioxide Composite As a Bifunctional Coating on Sulfur Cathode

Soluble Polysulphide Sorption Using Carbon Nanotube Forest for Enhancing Cycle Performance in a Lithium–sulphur Battery

Effects of Cell Construction Parameters on the Performance of Lithium/Sulfur Cells

Capturing Polysulfides with a Functional Anhydride Compound for Lithium–Sulfur Batteries

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture

Improved Lithium–sulfur Batteries with a Conductive Coating on the Separator to Prevent the Accumulation of Inactive S-related Species at the Cathode–separator Interface

Enhanced Performance of a Lithium–Sulfur Battery Using a Carbonate-Based Electrolyte

Sulfonic Groups Originated Dual-Functional Interlayer for High Performance Lithium-Sulfur Battery

Promoted Rate and Cycling Capability of Li–S Batteries Enabled by Targeted Selection of Co-Solvent for the Electrolyte

Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells.

Manipulating Surface Reactions in Lithium–sulphur Batteries Using Hybrid Anode Structures

Inhibition of Polysulfides Dissolution and Shuttling by Solid Electrolyte and Macro-Structural Cathode for Lithium-Sulfur Batteries