Abstract:Indium thin oxide (ITO)-free planar perovskite solar cells (PSCs) were fabricated at a low temperature (150 degrees C) in this work based on the transparent electrode of photolithography processed nickel/gold (Ni/Au) mesh and the high conductivity polymer, PH1000. Ultrathin Au was introduced to increase the conductivity of metal mesh, and the optimal hexagonal Ni (30 nm)/Au (10 nm) mesh (line width of 5 mu m) shows a transmittance close to 80% in the visible light region and a sheet resistance lower than 16.9 Omega/sq. The conductive polymer PH1000 not only smooths the raised surface of the metal mesh but also enhances the charge collection ability of metal mesh. The fabricated PSCs have the typical planar structure (glass/Ni-Au mesh/PH1000/PEDOT:PSS/MA(y)FA(1-y)PbI(x)Cl(3-x)/PCBM/BCP/Ag) and the champion PSC (0.09 cm(2)) obtains a power conversion efficiency (PCE) of 13.88%, negligible current hysteresis, steady current density and PCE outputs, and good process repeatability. Its photovoltaic performance and stability are comparable to the reference PSC based on the ITO electrodes (PCE = 15.70%), which demonstrates that the Ni/Au mesh transparent electrodes are a promising ITO alternative to fabricate efficient PSCs. The relatively lower performance of Ni/Au based PSC results from the relatively slower charge extraction and stronger charge recombination than the ITO based PSC. Further, we tried to fabricate the large area (1 cm(2)) device and achieve a PCE over 6% with negligible hysteresis and steady current density and PCE outputs. The improvements of perovskite film quality and interface modification should be an effective approach to further enhance the device performance of Ni/Au based PSCs, and the Ni/Au mesh electrode may find wider applications in PSCs and flexible devices.

High-performance NiO/Ag/NiO Transparent Electrodes for Flexible Organic Photovoltaic Cells.

Ultra-Smooth and Efficient NiO/Ag/NiO Transparent Electrodes for Flexible Organic Light-Emitting Devices

Inkjet-Printed Ag Grid Combined with Ag Nanowires to Form A Transparent Hybrid Electrode for Organic Electronics

Highly conductive transparent organic electrodes with multilayer structures for rigid and flexible optoelectronics

Smooth ZnO:Al-AgNWs Composite Electrode for Flexible Organic Light-Emitting Device

A Flexible and Thin Graphene/Silver Nanowires/Polymer Hybrid Transparent Electrode for Optoelectronic Devices.

A 1D:2D structured AgNW:MXene composite transparent electrode with high mechanical robustness for flexible photovoltaics

1D:2D Structured AgNW:MXene Composite Transparent Electrode with High Mechanical Robustness for Flexible Photovoltaics

Efficient Ni/Au Mesh Transparent Electrodes for ITO-Free Planar Perovskite Solar Cells.

High-Performance Copper Nanowire Electrode for Efficient Flexible Organic Light-Emitting Diode

Enhanced Adhesion of Ag Nanowire Based Transparent Conducting Electrodes for Application in Flexible Electrochromic Devices

Low Roughness Silver Nanowire Flexible Transparent Electrode by Low Temperature Solution-Processing for Organic Light Emitting Diodes

Transparent ultrathin Ag nanomesh electrode fabricated by nanosphere lithography for organic light-emitting devices

Highly Performance Flexible Polymer Solar Cells by Flipping the Bilayer Film of Ag Nanowires and Polyvinyl Alcohol on Polyethylene Terephthalate as Transparent Conductive Electrodes

“Reinforced Concrete”-Like Flexible Transparent Electrode for Organic Solar Cells with High Efficiency and Mechanical Robustness

Novel Transparent High-Performance AgNWs/ZnO Electrodes Prepared on Unconventional Substrates with 3D Structured Surfaces

Fabrication of Nickel Oxide Nanopillar Arrays on Flexible Electrodes for High-Efficient Perovskite Solar Cells.

Large‐Area Flexible Organic Solar Cells with a Robust Silver Nanowire‐Polymer Composite As Transparent Top Electrode

Silver Nanowire Electrodes integrated in Organic Solar Cells with Thick Active Layer based on a Low‐Cost Donor Polymer

High-performance flexible Ag nanowire electrode with low-temperature atomic-layer-deposition fabrication of conductive-bridging ZnO film